Connecting The Power Source; To Use The Ac Power Adapter; Connexion D'une Alimentation; Utilisation De L'adaptateur Secteur Et Du Câble Dc - Samsung SCL805 Owner's Instruction Manual

Video camcorder
Table of Contents

Advertisement

ENGLISH
Preparing

Connecting the Power Source

There are two ways to connect power source.
-
Using the AC Power Adapter : used for indoor recording.
-
Using the Battery Pack: used for outdoor recording.

To use the AC Power Adapter

1. Connect the AC Power
Adapter to the AC cord.
2. Connect the AC cord to a wall
socket.
Note: The plug and wall
socket type may be
different depending on
regional conditions.
3. Connect the other end of the
DC cable to DC jack of the
camcorder.
4. To set the camcorder to the CAMERA mode.
a. Hold down the tab of the power switch and push the switch
to CAMERA mode.
b. Make sure that the Lens Cap is open.
c. Open the LCD monitor and make sure that the image
appears in the LCD monitor.
- The LCD monitor is turned on automatically when it's
opened more than 30 degrees.
Note: If the adapter is used next to a TV or the camcorder, it may
cause the TV or camcorder to emit noise. Move the adapter
away from the TV, camcorder or the antenna cable.
18
Réglage du caméscope

Connexion d'une alimentation

Utilisation de l'adaptateur secteur et du câble DC
2
1
4. Placez l'appareil en mode caméscope en suivant les
Remarque: Si vous utilisez l'adaptateur secteur à proximité d'un
Deux possibilités d'alimentation s'offrent à vous:
-
l'adaptateur secteur et le câble DC: utilisation intérieure,
-
le bloc batterie: utilisation extérieure.
CAMERA
3
instructions ci-après.
a. Tout en maintenant appuyé le petit bouton au milieu du
commutateur, placez ce dernier sur la position CAMERA.
b. Retirez le capuchon de la lentille.
c. Ouvrez l'écran LCD et assurez-vous que l'image apparaît.
-
L'écran LCD s'allume automatiquement lorsqu'il est
ouvert de plus de 30°.
téléviseur ou du caméscope, des parasites peuvent
apparaître sur l'écran. Eloignez l'adaptateur du
téléviseur,
du caméscope ou du câble de l'antenne.
FRANÇAIS
1. Branchez le câble DC sur
l'adaptateur secteur.
2. Connectez l'adaptateur à
une prise murale.
Remarque: le type de fiche
et de prise
murale peut
différer selon le
pays.
3. Connectez l'autre extrémité
du câble DC au caméscope.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scl810Scl860Scl870

Table of Contents