Adjusting The Lcd During Play; Controlling Sound From The Speaker - Samsung SCD33, SCD34, SCD39 Owner's Instruction Book

Samsung digital video camcorder owner's instruction book
Hide thumbs Also See for SCD33, SCD34, SCD39:
Table of Contents

Advertisement

ENGLISH
Basic Recording

Adjusting the LCD during PLAY

You can adjust the LCD during playback.
The adjustment method is the same procedure as used in CAM mode. (see page 31)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
When you use the LCD screen for playback, you can hear recorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
- Take the following steps to lower the volume or mute the sound while playing a tape
on the camcorder.
1. Set the power switch to PLAYER mode.
2. Press
(PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the
volume.
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19 and you will not hear
any sound when the volume is set on 00.
If you close the LCD while playing, you will not hear sound from the speaker.
Notes
When the cable is connected to the Multi AV jack, you cannot hear sound from the speaker
and cannot adjust the volume.
If a cable is connected to the Multi AV jack, you can hear sound from the speaker when AV
IN/OUT MODE on MENU is set to AV IN or S-VIDEO IN. (SCD34/D39 only)
You can hear sound from speaker by removing the connected cable from the Multi AV jack.
The speaker turns off when you use headphones.
34
34
2
3-1
VOL/MF
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL.
[ 1 1 ]
1 2 : 0 0 A M
J A N . 1 0 , 2 0 0 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd34Scd39

Table of Contents