Recording In Player Mode - Samsung SCD107 Owner's Instruction Book

Recording in PLAYER mode

Recording in PLAYER mode
✤ You can use this camcorder as a recorder.
✤ You can record a tape from VCR or TV.
1. Connect the camcorder and VCR or TV with the AUDIO/VIDEO cable.
2. Set the power switch of the camcorder to PLAYER mode.
3. Turn on the VCR or TV.
4. Insert the blank tape with protection tab closed into the camcorder.
I
If you want to record from a connected VCR,
insert a recorded VHS tape into the VCR.
5. Press the MENU button, turn the MENU DIAL to highlight A/V and press the
ENTER button.
6. Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER button to select
AV IN.
I
"AV IN" and picture appear on the LCD monitor.
I
OUT : Releases the INPUT mode.
7. Press the START/STOP button to set the camcorder to REC PAUSE mode.
I
"PAUSE" on the LCD monitor.
8. Select the TV program or playback the VHS tape.
9. Press START/STOP button to start recording.
I
If you want to pause recording for a while, press the START/STOP button again.
10.To stop recording, press the
Notes
I
Recording from an analpg VCR to the camcorder is only possible when the VCR is playing back at normal speed.
I
If you want to see the camcorder picture with a TV, set AV IN/OUT in the menu to OUT.
(STOP) button.
ENGLISH
VIDEO
S-VIDEO
AUDIO(L)
VCR
AUDIO(R)
Audio/Video
TV
S-VIDEO
CAMCORDER
ANTENNA
PLAYER MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
AV IN/OUT
DV
IEEE
USB 1394
A/V
S-VIDEO
MIC
12
SOUND[1]
IN
77 77