Maintenance; After Finishing A Recording - Samsung SCD107 Owner's Instruction Book

ENGLISH

Maintenance

After finishing a recording

✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery.
1. Slide the TAPE EJECT switch in the direction of the arrow.
I
Opening the cassette door ejects the tape automatically.
I
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
I
Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
I
Press the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
100 100
2
1
3 4