Download  Print this page

Date/time - Samsung SCD103/D105 Owner's Instruction Manual

Digital video camcorder.
Hide thumbs

Advertisement

Advanced Recording
G

DATE/TIME

✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
I
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
I
You can choose to display - the OFF, DATE, TIME, DATE/TIME
- OFF only
- DATE only
- TIME only
- DATE & TIME
I
To return to the previous menu, highlight the DATE/TIME in the middle of OSD and
press the ENTER button.
6. To exit, press the MENU button.
Notes
I
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
I
The DATE/TIME will read "- - -" in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera's memory.
- When the lithium battery becomes weak or dead.
I
Before you use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 39.
ENGLISH
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME
53
53

Advertisement

Table of Contents

This manual is also suitable for:

Scd103Scd105Scd103/215

Comments to this Manuals

Symbols: 0
Latest comments:
  • Paul Howard Duran Jan 18, 2019 10:25:
    I cannot get a Samsung video cam. SDC103 off of "Prot​ection&quo​t; flashing on the screen in tape mode.
    I bought the cam. from a thrift store for .00 and ordered a battery and battery charger for it.
    The tape plays great.
    Is there a reset button, or a way to reset the cam.?