USB interface
This chapter explains how to connect a PC using the USB cable for various actions.
-
To connect an USB cable to a PC, refer to the software installation instructions
and available PC specifi cation.
SYSTEM REQUIREMENTS
Transferring a Digital Image through a USB Connection
•
The memory camcorder supports USB 2.0 High speed.
(Depends on the PC specifi cation)
You can transfer a recorded fi le in storage media to a PC via a USB connection.
•
If you transfer data to a PC, you need to install the software (DV Driver, Video
•
Codec, DirectX 9.0) supplied with the memory camcorder.
USB Connection Speed (depending on the System)
High speed USB connection is supported by Microsoft (Windows) device drivers
•
only.
Windows 2000 - High speed USB on a system with Service Pack
•
4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1
•
or later installed.
Windows Vista - High speed USB on a system with Service Pack
•
1 or later installed.
System Requirements
Windows operating systems
CPU: Intel® Pentium 4™, 2GHz or higher, or the equivalent
•
Operating systems: Windows® 2000/XP/Vista
•
Standard installation is required. If you have upgraded your current operating
system, we can not guarantee
the proper operation of the product.
Memory: 512MB RAM or higher
•
Hard Disk: 2GB or higher
•
Resolution: 1024x768 dots, 24bit color
•
USB port: USB2.0 High Speed
•
- System requirements mentioned above are recommendations. Even on a system that
satisfi es the requirements may not ensure the operation depending on the system.
- This memory camcorder is recognized just as a removable storage device on the
Macintosh computer. (Mac OS 10.3 or above supporting the High Speed USB
standards)
69_English
interface USB
Ce chapitre présente les raccords vers un ordinateur pour effectuer différentes fonctions.
- Pour raccorder un câble USB sur un ordinateur, reportez-vous aux instructions d'installation du
logiciel et aux caractéristiques techniques de l'ordinateur.
CONFIGURATION SYSTÈME
Transfert d'une image numérique par le biais d'une connexion USB
•
Le caméscope numérique prend en charge la fonction USB 2.0 à haut débit. (en
fonction des spécifi cations de l'ordinateur).
Vous pouvez transfrére un fi chier enregistré sur le support de stockage vers un
•
ordinateur par le biais d'une connexion USB.
Si vous transférez des données sur un ordinateur, vous devez installer le logiciel
•
(pilote DV, Codec vidéo, DirectX 9.0) compris avec le caméscope numérique.
Débit de la connexion USB en fonction du système
La connexion USB à haut débit est prise en charge par les
•
pilotes de périphérique Microsoft (Windows) uniquement.
Windows 2000 – Connexion USB à haut débit sur un ordinateur
•
équipé de Service Pack 4 ou d'une version plus récente.
Windows XP – Connexion USB à haut débit sur un ordinateur
•
équipé de Service Pack 1 ou d'une version plus récente.
Windows Vista – Connexion USB à haut débit sur un ordinateur
•
équipé de Service Pack 1 ou d'une version plus récente.
Besoins du système
Systèmes d'exploitation Windows
UCT : Intel® Pentium 4™, 2 GHz + ou équivalent
•
Systèmes d'exploitation : Windows® 2000/XP/Vista
•
Installation standard Si vous avez récemment mis votre sytème d'exploitation à
jour, nous ne pouvons garantir le fonctionnement adéquat de ce produit.
Mémoire : RAM de 512 Mo ou +
•
Disque dur : 2 Go ou +
•
Résolution : 1024x768 points, couleur 24 bits
•
Port USB : USB 2.0 haut débit
•
- Nous vous conseillons la confi guration des systèmes mentionnée plus haut.
Selon votre système, le fonctionnement n'est pas garanti même s'il rencontre les
normes de confi guration.
- Le caméscope numérique est reconnu comme périphérique de stockage
amovible par les ordinateurs Macintosh.
(Mac OS 10.3 ou ultérieur peut accueillir la norme USB à haute débit standard)
French_69