Symptoms And Solutions - Samsung SC-MX10 User Manual

troubleshooting
✪ If you encounter any problem using your camcorder, check the following before requesting service.
If these instructions do not solve your problem, contact the nearest Samsung authorized service
center.

Symptoms and solutions

Power
Symptom
The power does not turn on.
The power automatically turns off.
Power cannot be turned off.
The battery pack is quickly
discharged.
84_English
• The battery pack may not be installed on your memory camcorder. Insert a
battery pack to the memory camcorder.
• The inserted battery pack may be discharged. Charge the battery pack or
replace it with a charged one.
• If you use an AC power adaptor, make sure it is properly connected to the
wall outlet.
• Your memory camcorder has been left for more than 5 minutes without any
button operation. To turn on your memory camcorder, press the Record
start/stop button.
• Is "Auto Power Off" set to "On"?
If no button is pressed for about 5 minutes, the memory camcorder is
automatically turned off ( "Auto Power Off"). To disable this option,
change the setting of "Auto Power Off" to "Off"
• The battery pack is almost discharged. Charge the battery pack or replace
it with a charged one.
• Remove the battery pack or unplug the AC power adaptor, and connect
the power supply to the camcorder again before turning it on.
• The temperature is too low.
The battery pack is not fully charged. Charge the battery pack again.
•
• The battery pack reached its lifespan and cannot be recharged.
Use another battery pack.
Explanation/Solution
page 65
➥