Download  Print this page

How To Use And Set The Electronic Clock - Kenwood CK 600 Instructions For Use - Installation Advice

Hide thumbs

Advertisement

5 - ELECTRONIC CLOCK
ELECTRONIC CLOCK
The electronic clock has an illuminated
display and can either be used as a 24
hour clock or a 99 minute alarm.
Upon immediate connection of the oven
or after a powercut, three zeros will flash
on the display panel.
To set the hour it is necessary to push
the
button and then, within 7 sec-
onds, the
or
set the exact hour.
A powercut will make the clock go
back to zero.
Fig. 5.1
(fig. 5.1)
button until you have
ELECTRONIC ALARM
The alarm program consists only of a
buzzer which may be set for a maximum
period of 99 minutes.
To set the time, push the
you obtain the desired time in the panel.
The
symbol will be lit and the count-
down will begin. At the end of the time,
the
symbol will switch off and an
intermittent buzzer, will sound for 7 min-
utes, this can be stopped by pressing
the
buttons.
To stop the alarm countdown at any
time press the
together and release the
SETTING THE FREQUENCY OF THE ALARM
SOUND
3 possible sounds can be made by
pressing the
button.
or
until
and
buttons
button first.
17

Advertisement

Table of Contents
loading

  Related Manuals for Kenwood CK 600