Electrical Connection (Not For Uk) - Electrolux EFC 9530X User Manual

5 installation
Unpacking
Check that the cooker hood has no damages. Transportation
damages should immediately be reported to the company
responsible for the transportation.
Damages, faults and eventually missing details should
immediately be reported to the retailer. Take care of the
packing materials so that small children cannot play with
them.
Location
The hood is to be mounted on the wall. When installed, the
hood must be not less than 60cm above electric burners or
70cm above gas or mixed-fuel burners.

Electrical connection (not for UK)

Safety warnings for the electrician
Before connecting the appliance to the power supply, check
that the voltage indicated on the rating plate corresponds to
the mains power supply available. Appliances fitted with a plug
can be connected to any standard power socket within easy
access.
Should it be necessary to provide a fixed connection, the hood
must only be installed by an electrician authorized by the local
electricity board. When installing, an omnipolar disconnector
with a distance of at least 3mm between contacts must be
provided.
Fixed connection of the appliance must only be carried out by
an authorized electrician.
Electrical connection (for UK only)
Safety warnings for the electrician
Connect the hood to the mains supply via a double pole
switch which has 3mm minimum separation between the
contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom only:
• The wire which is coloured green and yellow must be
connected to the terminal which is marked with the
letter E or by the earth symbol (
or green and yellow;
• The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black, -
• The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red.
), or coloured green