Draper RWL10LEDC Instructions Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Work Light
  5. RWL10LEDC
  6. Instructions manual
Draper RWL10LEDC Instructions Manual

Draper RWL10LEDC Instructions Manual

10w cob led rechargeable worklamp
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTIONS FOR
10W COB LED
Rechargeable Worklamp
Stock No.15384
Part No.RWL10LEDC
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all instructions before assembling,
operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RWL10LEDC and is the answer not in the manual?

Questions and answers

Related Manuals for Draper RWL10LEDC

Summary of Contents for Draper RWL10LEDC

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Title Page

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS 2.1 CONTENTS PAGE CONTENT PAGE TITLE PAGE INTRODUCTION ........................2 REVISION HISTORY......................2 UNDERSTANDING THIS MANUAL ..................2 COPYRIGHT NOTICE ......................2 CONTENTS CONTENTS ...........................3 GUARANTEE GUARANTEE ........................4 INTRODUCTION SCOPE ..........................5 SPECIFICATION ........................5 HANDLING & STORAGE ......................5 HEALTH & SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS ..................6 SPECIFIC SAFETY INSTRUCTIONS FOR TRANSFORMERS/BATTERY CHARGERS....7 SPECIFIC SAFETY INSTRUCTIONS FOR BATTERIES..............7 LITHIUM-ION MATERIAL DATA SHEET................8...

  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.

  • Page 5: Introduction

    This 10W ultra bright rechargeable COB worklamp is for use where mains power is not easily obtainable. It is recharged via a 230V AC Adaptor/Charger or 12V DC cigarette type charger (both supplied). 4.2 SPECIFICATION Stock no........................... 15384 Part no.......................... RWL10LEDC Battery: Type ........................Lithium-ion Rated voltage........................7.4V Rating ..........................2.2Ah Chargers: Type ......................Double isolating...

  • Page 6: Health & Safety Information

    HEALTH & SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully.

  • Page 7: Specific Safety Instructions For Transformers/Battery Chargers

    HEALTH & SAFETY INFORMATION Wait for the machine to stop. Unless the machine is fitted with a safety brake; some parts may continue to move due to momentum. Wait for all parts to stop; then unplug it from the power supply before making any adjustments, carrying out maintenance operations or just finishing using the tool.

  • Page 8: Lithium-Ion Material Data Sheet

    HEALTH & SAFETY INFORMATION i. Charge battery regularly in conditions between 5°C to 45°C with the specified charger designed for this battery. j. Store in a dry, well ventilated area within the recommended limits of 30° to 50°C. k. During decommissioning remove the battery cell for recycling separately to the product, which is covered by the waste electrical and electronic equipment directive.

  • Page 9: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION Power input socket. Bracket. On/Off switch. Angle tightening bolt. Handle. Stand fixing bolt. COB LED panel. Lamp head. Stand. Magnet.

  • Page 10: Unpacking & Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the product.

  • Page 11: Assembly 8.1 Assembly

    ASSEMBLY 8.1 ASSEMBLY – FIG. 1 To attach the lamp head to the bracket thread a washer on each of the angle fixing bolts then insert screws through the holes each side of the bracket, then into the side holes located on the lamp head brackets .

  • Page 12: Battery Charging

    BASIC OPERATION & USE 9.1 BATTERY CHARGING – FIG. 2 WARNING! Ensure the worklamp is turned off before charging. Insert the transformer's jack plug from either the 230V AC charger or 12V DC charger into the power input socket (the input socket is fitted with a protective rubber dust cap .

  • Page 13: Maintenance

    10. MAINTENANCE There are no replacement or maintainable parts to this product.

  • Page 14: Explanation Of Symbols

    11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS WEEE Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. Class II construction (Double insulated). For indoor use only. Do not expose to rain. Non-Self-Resetting protective device. Fail-safe safety isolating transformer. Polarity indication.

  • Page 15: Disposal

    12. DISPOSAL 12.1 DISPOSAL At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. Contact your local authority for details of collection schemes in your area. In all circumstances: •...
  • Page 16 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area. YOUR DRAPER STOCKIST RWCH0316...

Table of Contents