Cooling Your Room - Samsung MH020FPEA User Manual

Cooling Your Room

14
E-
You must select the Cool mode if you wish to adjust the:
Cooling temperature
Fan speed when cooling
1 If necessary, press the
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: The indoor unit beeps each time you press the
The air conditioner runs in COOL mode.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3 To adjust the temperature, press the
the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: Each time you press the
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4 Select the fan speed by pressing the
until the required setting is displayed:
Automatic (rotated :
Low
Medium
High
Result: Each time you press the
beeps.
5
To control the direction of the air flow, refer to page 19.
(On/Off) button.
button one or more times until
button:
button one or more times
button, the indoor unit
button.
)