Wired Remote Controller-Buttons And Display; Centralized Controller - Samsung AVMWC020CA0 Owner's Instructions Manual

Wired Remote Controller-Buttons and Display

The wired remote controller is an optional accessory and it is installed on the wall.
To use the wired remote controller, refer to an appropriate manual.
Removing frost indicator
(Except Cooling Only Models)
Communication error indicator
On Timer setting
Off Timer setting
Test indicator
Temperature adjustment
buttons
On Timer button
Off Timer button
Test button
N N o o t t e e Test button is for your installation specialist. You must NOT press it.
N N o o t t e e
After cleaning the air filter, press the filter reset button. Then the wired remote
controller will display the FILTER SIGN indicator when the time to clean the air
filter; refer to page 11 or 12.
The heating mode( ) is not selected in cooling only models.
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Mode selection button
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off & Timer
Set/Cancel button
On/Off indicator
Fan speed adjustment
button
Swing button
Filter Reset button
7
E-