Selecting The Automatic Operating Mode - Samsung AQ09A2MD Owner's Instructions Manual

Selecting the Automatic Operating Mode

10
E-
You can start the air conditioner in Automatic mode from your remote
control. In the Automatic mode, the standard temperature and the
optimum fan speed is selected automatically. You can adjust the
standard temperature but not the fan speed.
1
If necessary, press the
Result: The 5 Way indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,
press the MODE button on the remote control one or more times until it
appears.
Result: The indoor unit beeps each time you press the MODE button.
The air conditioner runs in AUTO mode.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3 To adjust the standard temperature (The air conditioner automatically
set the standard temperature by the current room temperature.),
press the TEMPERATURE buttons one or more times.
SET TEMP. SET TEMP.
-2°C -1°C
< When you feel hot >
(On/Off) button.
- SET TEMP. SET TEMP.
Standard temperature
< When you feel chilly >
+1°C +2°C