Kenwood TS-890S Command Reference Manual page 25

EX
Menu Setting
1 2 3
E X P1
Set
x
;
1 2 3
Read
E X P1
1 2 3
E X P1
Answer
x
;
PC Control Command referenCe guide
4 5 6 7 8
P2 P2 P3 P3 P4
4 5 6 7 8
P2 P2 P3 P3 ;
4 5 6 7 8
P2 P2 P3 P3 P4
Parameters:
P1 (Menu type number)
~
9
0: Menu
P5 1: Advanced Menu
P2 (Category number)
00 ~ 99
 Entering a non-existing number causes an error to occur.
 Enter any value when using the Advanced Menu.
9 10
P3 (Item number)
00 ~ 99
~
9  Entering a non-existing number causes an error to occur.
 Entering a number that cannot be set also causes an error to
P5
occur.
P4 (Configuration classification)
Space: Normal Configuration
9: Initial value setting (setting command only)
 Response is always a space.
P5 (String of alphanumeric characters for the Menu setting)
Normally a 3-digit number (blank digits must be entered as "0".)
PF key settings use 4 digits (refer to the PF Key assignment ID
lists).
A power-on message can vary in length from 0 to 15 characters.
Screen saver text can vary in length from 0 to 10 characters.
 Refer to the Menu tables below for the EX Command
Parameter lists.
 Entering a value larger than the size limit causes an error to
occur.)
 When the P4 is set to the initial value, omit this parameter.
– 24 –