Page 3
Safety Instructions/Consignes de sécurité/Sicherheitsvorkehrungen/Instrucciones de seguridad WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. To reduce the hazard of electrical shock, do not remove cover or back. No user serviceable parts inside. Please refer all servicing to qualified personnel.The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Page 5
SPECIAL NOTE: Should your PG Series ever require servicing, a Return Authorization number (RA) is necessary. Without this number, the unit will not be accepted. If purchased in the United States, please call Samson at 1-800-372-6766 for a Return Authorization number prior to shipping the unit. If purchased outside the United States, contact your local Samson dealer for details.
Rugged construction (an all-steel chassis with a cool gray finish and a lightweight anodized aluminum heatsink) makes the PG Series eminently roadworthy. • Extended three-year warranty. • Last but certainly not least, value. The Samson PG Series has been designed from the ground up to deliver excellent yet affordable sound quality...
1: Handle - For easy transport while carrying, or while rack mounting, the PG amplifier features two die-cast handles located con- veniently on the left and right side of the front panel. 2: POWER switch - Use this to power the PG Series on or off. The internal LED lights whenever the PG Series is powered on. 3: Vent -The PG series amplifiers stay cool thanks to their twin, forced-air cooling tunnels.
Guided Tour - Rear Panel 1: Fan - This variable-speed fan provides vital cooling to your PG Series (the hotter the amp gets, the faster the fan blows!). Make sure that both the front and rear panels are kept free of all obstructions and that cool, fresh air is accessible at all times. Also, try to ensure that the PG Series is used in a dust-free environment.
Setting Up and Using Your PG Series Setting up your PG Series is a simple procedure which takes only a few minutes: 1. Remove all packing materials (save them in case of need for future service) and decide where the amplifier is to be physically placed—it can be used free-standing or mounted in a standard 19”...
If you encounter difficulty with any aspect of setting up or using your PG Series, contact your local Samson dealer. If purchased in the United States, you can call Samson Technical Support (1-800-372-6766) between 9 AM and 5 PM EST.
Bridge or Parallel mode. When this switch is placed in the “STEREO” (center) position, the PG Series functions as a true stereo amplifier, where both of the two independent amplifier channels (Channel 1 and Channel 2) can receive different input signals and produce independent output signals.
PG Series in Stereo, Bridge and Parallel modes. Wiring for Speakon™ connectors (shown on the right) is indi- cated where appropriate. Stereo Mode: (two or four speakers) SAMSON MMPL2242 MPL2242 MPL2242 (2 ohm min) (2 ohm min)