Setting The Dynamic Range Compression - Yamaha ATS-4080 Owner's Manual

1
Display Wi-Fi settings on the iOS device and
select the unit from "SETUP A NEW AIRPLAY
SPEAKER...".
2
When the following screen is displayed, select the
network (access point) to which the unit will be
connected.
NOTE
If the unit is connected to a network using the MusicCast CONTROLLER app,
network settings will be changed to those of the MusicCast CONTROLLER app.
Name of the unit
Tap to connect to the selected
network
Name of the selected network
Name of the unit

Setting the dynamic range compression

Select the dynamic range compression level.
This function is set to "No compression" by default.
1
Turn off the unit.
2
Use the remote control to select the desired
compression level.
Compresssion
level
Apply the maximum
Compression
amount of dynamic range
(maximum)
compression.
Apply the standard amount
Compression of dynamic range
(standard) compression for normal
home use.
Dynamic range
No compression
compression is not applied.
51
En
Operations (buttons must
Function be pressed consecutively
within three seconds.)
STEREO, VOLUME +, and
then z
STEREO, VOLUME -, and
then z
STEREO, |, and then z