Samson DMS80 Owner's Manual

Samson DMS80 Owner's Manual

Desktop monitor system stereo 40w x 2 mixer full range speakers
Table of Contents

Advertisement

Available languages

Available languages

DESKTOP
MONITOR SYSTEM
STEREO 40W X 2 MIXER
F U L L R A N G E S P E A K E R S
DMS80
OWNERS MANUAL
®

Advertisement

Table of Contents
loading

Summary of Contents for Samson DMS80

  • Page 1 DESKTOP MONITOR SYSTEM STEREO 40W X 2 MIXER F U L L R A N G E S P E A K E R S DMS80 OWNERS MANUAL ®...
  • Page 2: Table Of Contents

    ENGLISH INTRODUCTION FEATURES OPERATING NOTES CONTROLS AND FUNCTIONS INSTALLATION TROUBLESHOOTING SPECIFICATIONS FRANCAIS INTRODUCTION DESCRIPTION NOTES D’UTILISATION RÉGLAGES ET FONCTIONS INSTALLATION ASSISTANCE TECHNIQUE CARACTÉRISTIQUES TECHNIQUES DEUTSCHE EINLEITUNG BESCHREIBUNG BEDIENUNGSANWEISUNGEN EINSTELLUNGEN UND FUNKTIONEN AUFBAU UND ANSCHLUß FEHLERSUCHE TECHNISCHE DATEN ESPANOL INTRODUCCION CARACTERISTICAS NOTAS OPERATIVAS FUNCIONES Y CONTROLES INSTALACION...
  • Page 3: Introduction

    I N T R O D U C T I O N Thank you for purchasing the Samson DMS80 Desktop Monitor System. The DMS80 is a compact true high fidelity sound system. The DA80, a highly advanced stereo amplifier and the M40 full range speakers were developed specifically for use with keyboard setups, project studios, and computer multimedia systems.
  • Page 4: Features

    Features: • DA80 Amplifier produces 40 watts per channel into 8 ohms • Extremely compact (1.6 / 41mm H) all metal amplifier chassis is strong enough to support up to 40 lbs (18kg) • Stereo 5-band Graphic Equalizer with In/Out switch •...
  • Page 5: Operating Notes

    Do not connect speakers and turn on power until you have read this manual thoroughly. • While unpacking the DMS80 inspect all items for quality of appear- ance and physical damage. If shipping damage has occurred, immediately notify your dealer.
  • Page 6 +12db +12db +12db • • • • • • • • • • • MIC/INST. • • • • • • • • • • -12db -12db -12db -12db 5 BAND GRAPHIC EQUALIZER LEVEL MIC/INST. MIC/INST. PHONES 100% SAMSON LEVEL...
  • Page 7: Controls And Functions

    C O N T R O L S 60Hz: Boost to bring out kick drum, bass guitar or to add more low end “punch” to a mix. Cutting this frequency can help clean up a muddy sound. 250Hz: Adjusts the mid bass range. Boost to add “warmth” to vocals and strings.
  • Page 8 C O N T R O L S 9. MIC/INST. SWITCH Depress the MIC/INST. (Microphone/Instrument) switch to its On position to select the audio signal from the MIC/INST. inputs. Release the MIC/INST. switch to its Off position to mute the audio signal from the MIC/INST.
  • Page 9 LEFT LEFT+ LEFT- RIGHT- RIGHT+ SAMSON DESKTOP MONITOR SYSTEM STEREO 40W X2 MODEL:DA80 1. SPEAKER OUT This push-spring terminal strip is the amplified output which powers the speakers. Any non-amplified speakers may be used as long as they are rated to meet a 6 ohm to 8 ohm impedance. There will be no output when headphones are inserted into the headphone jack.
  • Page 10 Replacement size is a standard F3A miniature fuse (5mm x 20mm) for 115V systems or T2A for 230V systems. If a fuse continues to blow, please contact Samson service at 1-800-3SAMSON (1-800-372-6766). 7. AC INLET Connect the supplied standard 3-pin “IEC”...
  • Page 11: Installation

    NOTE: Please read the Operating Notes Section (pg. 4) of this manual before connection or attempting to operate the DMS80. 1. Unpack the DMS80. Find a secure place where the DA80 and M40 speakers will be used. The DA80 amplifier is strong enough to sup- port 40 lbs.
  • Page 12 I N S T A L L A T I O N 4. Before connecting the DA80 to an AC outlet, make sure the POWER switch is off (out position) and the MASTER VOLUME and MIC/INST. LEVEL controls are rotated completely counter-clock- wise.
  • Page 13: Troubleshooting

    Continue adjusting until the sound level is balanced to the amplifier. • The DMS80 becomes very hot and sound distorts. The speakers are shorting. Recheck the wiring at the terminals or additional speakers which may have dropped the load impedance below 6 ohms.
  • Page 14: Specifications

    S P E C I F I C A T I O N S DA80: Nominal Signal Levels Line In: Aux/CD In: Mic/Inst. In: Line Out: Total Harmonic Distortion: Input Impedance Line, Aux/CD in: Mic/Inst. in: Graphic EQ: (60Hz, 250Hz, 1kHz, 3.5kHz, 12kHz) Power Rating (per channel): 40 Watts into 6–8 Ohms at less than 1% THD Input Sensitivity 40 watts into 8 Ohms: 250mV rms...
  • Page 15: Introduction

    I N T R O D U C T I O N Nous tenons à vous remercier de la confiance que vous nous témoignez en choisissant le Système d’écoute DMS80 de Samson. Le DMS80 est un système compact de reproduction sonore haute fidélite. Le DA80, un amplificateur stéréo très sophistiqué, et les enceintes large bande M40 ont été...
  • Page 16: Description

    Description : • L’amplificateur DA80 délivre 40 Watts par canal dans 8 Ohms. • Le boîtier métallique extrêmement compact de l’amplificateur (sa hauteur est de 41 mm) peut supporter un poids de 18 kg. • Correcteur graphique stéréo 5 bandes avec touche de mise en/hors ser- vice.
  • Page 17: Notes D'utilisation

    Ne connectez pas les enceintes et ne mettez pas l’appareil sous tension avant d’avoir lu ce manuel attentivement. • Lorsque vous sortez le DMS80 de son emballage, vérifiez que l’appareil n’a subi aucune dégradation pendant le transport. Le cas échéant, signalez-le immédiatement à votre revendeur.
  • Page 18 +12db +12db +12db • • • • • • • • • • • MIC/INST. • • • • • • • • • • -12db -12db -12db -12db 5 BAND GRAPHIC EQUALIZER LEVEL MIC/INST. MIC/INST. PHONES 100% SAMSON LEVEL...
  • Page 19: Réglages Et Fonctions

    R É G L A G E S 60Hz : Accentuez cette fréquence pour mettre en valeur la grosse caisse, la guitare basse ou pour donner plus de punch dans les basses à votre mixage. Atténuez-la pour améliorer la clarté sonore globale. 250Hz : Permet de régler les bas médiums.
  • Page 20 R É G L A G E S TOUCHE MIC/INST. Appuyez sur la touche MIC/INST. (Microphone/Instrument) pour sélection- ner l’entrée Micro/Instrument. Appuyez de nouveau sur la touche MIC/INST. pour la désactiver et ainsi couper le signal. Cette touche est utilisée en combinaison avec le réglage du niveau Micro/Instrument (voir le point 11 ci- dessous).
  • Page 21 LEFT LEFT+ LEFT- RIGHT- RIGHT+ SAMSON DESKTOP MONITOR SYSTEM STEREO 40W X2 MODEL:DA80 SORTIES HAUT-PARLEURS Ce bornier à ressorts sert à raccorder les enceintes. Vous pouvez utilisez des haut-parleurs non amplifiés à condition qu’ils présentent une impé- dance allant de 6 à 8 Ohms. cette sortie est coupée lorsque vous utilisez un casque..
  • Page 22 R É G L A G E S REMARQUE : Les signaux des entrées LINE IN ne sont amplifiés que lorsque la touche LINE de la face avant est activée. ENTRÉES AUX/CD Les connecteurs AUX/CD IN acceptent un signal audio de tout lecteur de CD ou de CD ROM, récepteur stéréo, console de mixage, carte son ou magnétoscope.
  • Page 23: Installation

    4 de ce manuel avant de connecter ou de tenter d’u- tiliser le DMS80. Dépaquetez le DMS80. Trouvez un lieu sûr où placer le DA80 et les enceintes M40. L’amplificateur DA80 est assez robuste pour supporter un poids de 18kg. Il peut être placé sous le moniteur d’un ordinateur. Assurez- vous que le DA80 se trouve sur une surface plane et rigide afin de permet- tre à...
  • Page 24 Avant de connecter le DA80 à une prise secteur, assurez-vous que l’inter- rupteur secteur est désactivé (Off) et que les réglages de volume général et de niveau MIC/INST. sont au minimum (dans le sens inverse des aiguilles d’une montre). Connectez le cordon secteur à l’embase secteur en face arrière du DA80 et à...
  • Page 25: Assistance Technique

    Continuez le réglage jusqu’à ce que les niveaux sonores soient équilibrés. • Le DMS80 dégage beaucoup de chaleur et le son est distordu. Les enceintes sont en court-circuit. Vérifiez de nouveau les connex- ions sur les borniers ou les enceintes qui ont pu faire chuter l’impédance de charge au-dessous de 6 Ohms.
  • Page 26: Caractéristiques Techniques

    C A R A C T É R I S T I Q U E S T E C H N I Q U E S DA80: Niveau nominal Entrée ligne : Entrée Aux/CD : Entrée Mic/Inst. : Sortie ligne : Distorsion harmonique totale : Impedance d’entrée Entrées Line, Aux/CD :...
  • Page 27: Einleitung

    E I N L E I T U N G Wir danken Ihnen, daß Sie sich für das Samson Desktop Monitor System entschieden haben. Der DMS80 ist ein kompaktes High-Fidelity Tonwiedergabe- System. Der DA80 ist ein hochentwickelter Stereo-Verstärker und die Breitband- Lautsprecher M40 sind speziell für die Benutzung von Keyboard-Anlagen, in...
  • Page 28: Beschreibung

    Beschreibung : • Der Verstärker DA80 liefert 40 Watt pro Kanal in 8 Ohm. • Das kompakte metallische Gehäuse des Verstärkers (41 mm hoch) kann 18 kg aushalten. • 5-bändiger Stereo Graphic Equalizer mit einer Ein- und Ausschaltungstaste. • LED-Pegelanzeige. •...
  • Page 29: Bedienungsanweisungen

    Verbinden Sie nicht die Lautsprecher, und schalten Sie das Gerät nicht an, bevor Sie nicht dieses Handbuch gründlich durchgelesen haben. • Wenn Sie den DMS80 auspacken, untersuchen Sie das Gerät auf äußere Beschädigung. Wenn das Gerät während des Transportes beschädigt wurde, geben Sie sofort Ihrem Fachhändler Bescheid.
  • Page 30 +12db +12db +12db • • • • • • • • • • • MIC/INST. • • • • • • • • • • -12db -12db -12db -12db 5 BAND GRAPHIC EQUALIZER LEVEL MIC/INST. MIC/INST. PHONES 100% SAMSON LEVEL...
  • Page 31: Einstellungen Und Funktionen

    E I N S T E L L U N G E N 60Hz : Heben Sie diese Frequenz zur Unterstreichung des Kesselpauken- oder Baß-Gitarrenklangs an, oder um in Ihrer Tonmischung den Tiefen mehr ”punch” zu geben. Schwächen Sie sie zur Verbesserung der allgemeinen Klangklarheit ab.
  • Page 32 E I N S T E L L U N G E N MIC/INST.-TASTE. Betätigen sie die MIC/INST.-Taste (Mikrofon/Instrument) zur Einstellung des Mikro/Instrument-Eingangs. Betätigen Sie die MIC/INST.-Taste erneut, um den Eingang abzuschalten und das Signal zu unterbrechen. Diese Taste wird gleichzeitig mit dem Mikro/Instrument-Pegelregler benutzt (s. unter Punkt 11 nach).
  • Page 33 LEFT LEFT+ LEFT- RIGHT- RIGHT+ SAMSON DESKTOP MONITOR SYSTEM STEREO 40W X2 MODEL:DA80 LAUTSPRECHER-AUSGÄNGE Diese mit Federung ausgestattete Anschlußleiste dient dem Anschluß der Lautsprecher. Sie können nicht-verstärkte Lautsprecher benutzen, solange deren Impedanz bei 6 bis 8 Ohm liegt. Dieser Ausgang ist unterbrochen, wenn Sie Kopfhörer benutzen.
  • Page 34 E I N S T E L L U N G E N BEMERKUNG : Die LINE IN Eingangssignale sind nur verstärkt, wenn die Taste LINE auf der Vorderseite betätigt wurde. AUX/CD-EINGÄNGE Die AUX/CD IN Eingänge nehmen Audio-Signale jedes CD- oder CD ROM- Spielers, Stereoempfängers, Mischpults, Soundkarte oder Videorecorder BEMERKUNG : Die AUX/CD IN Eingangssignale sind nur verstärkt, wenn die Taste AUX/CD auf der Vorderseite betätigt wurde.
  • Page 35: Aufbau Und Anschluß

    Handbuches, bevor Sie den DMS anschließen oder ver- suchen ihn zu bedienen. Packen Sie den DMS80 aus. Finden Sie einen geschützten Platz für die Benutzung des DA80 und den Lautsprechern M40. Der Verstärker hält 18 kg aus und kann wenn erwünscht unter einem Komputerbildschirm aufge- baut werden.
  • Page 36 A U F B A U Bevor Sie den DA80 an das Stromnetz anschließen, versichern Sie sich, daß der Netzschalter auf OFF steht, und daß die Lautstärkeregelungen und die MIC/INST. Pegel heruntergedreht sind (im Gegenuhrzeigersinn). Schließen Sie das Netzkabel an einen adäquaten Wandanschluß. Verbinden Sie die angeschlossenen Geräte mit den LINE Eingängen (Keyboard, Expander, Line-Ausgang, Soundkarte eines Komputers), mit den AUX/CD Eingängen (CD-Spieler, Stereoempfänger, Audio-Mischpult,...
  • Page 37: Fehlersuche

    Sie die Lautstärke der Soundkarte. Setzen Sie die Einstellungen fort, bis der Tonpegel ausgeglichen ist. • Der DMS80 gibt viel Wärme ab, und der Ton ist verzerrt. Die Lautsprecher sind kurzgeschlossenen. Untersuchen Sie erneut die Anschlüße der Anschlußleisten oder die Lautsprecher, deren Belastungsimpedanz unter 6 Ohm gefallen sein könnte.
  • Page 38: Technische Daten

    T E C H N I S C H E DA80: Nennpegel Line Eingang : Eingang Aux/CD : Eingang Mic/Inst. : Line Ausgang : Klirrfaktor : Eingangsimpedanz Engänge Line, Aux/CD : Eingang Mic/Inst. : Graphic Equalizer : Leistung pro Kanal : Eingangsempfindlichkeit 40 Watt in 8 Ohm : 1 Watt in 8 Ohm :...
  • Page 39: Introduccion

    I N T R O D U C C I O N Muchas gracias por adquirir el Sistema de monitores de sobremesa Samson DMS80. El DMS80 es un sistema compacto de sonido de alta fidelidad real. El DA80, un amplificador stereo de última generación y los altavoces de rango total M40 han sido desarrollados específica-...
  • Page 40: Caracteristicas

    C A R A C T E R I S T I C A S Características: • El Amplificador DA80 produce 40 watios por canal a 8 ohmnios • Un amplificador extremadamente compacto (41mm H) con un chasis totalmente metálico capaz de soportar un peso de hasta 18 kg •...
  • Page 41: Notas Operativas

    • El DMS80 ha sido diseñado especialmente con salidas de venti- lación localizadas en la parte superior, inferior y en los laterales del chasis metálico. Si decide colocar un monitor de ordenador encima del DA80, dependiendo del tamaño de la base de apoyo del moni-...
  • Page 42: Funciones Y Controles

    +12db +12db +12db • • • • • • • • • • • MIC/INST. • • • • • • • • • • -12db -12db -12db -12db 5 BAND GRAPHIC EQUALIZER LEVEL MIC/INST. MIC/INST. PHONES 100% SAMSON LEVEL...
  • Page 43 C O N T R O L E S Y 60Hz: El realce hace sobresalir el bombo, bajo o añade más "pegada" de graves a una mezcla. El corte de esta frecuen- cia le puede ayudar a aclarar un sonido algo oscuro. 250Hz: Ajusta el rango medio grave.
  • Page 44 C O N T R O L E S Y 9. INTERRUPTOR MIC/INST. Pulse el interruptor MIC/INST. (Micrófono/Instrumento) a la posición On para elegir la señal audio de las entradas MIC/INST. Deje este interruptor en Off para anular la señal de esas entradas. Esto se usa en combinación con el control MIC/INST.
  • Page 45 LEFT LEFT+ LEFT- RIGHT- RIGHT+ SAMSON DESKTOP MONITOR SYSTEM STEREO 40W X2 MODEL:DA80 1. SALIDA DE ALTAVOCES Estos terminales con resorte son la salida amplificada que da señal a los altavoces. Se puede usar cualquier altavoz no amplificado siempre que tengan una impedancia como mínimo de 6 a 8 ohm- nios.
  • Page 46 C O N T R O L E S Y NOTA: Las señales que van a LINE IN solo serán amplificadas cuando el interruptor LINE del panel frontal sea colocado en On. 3. AUX/CD IN Estos conectores aceptan entradas de señal audio que vengan de reproductores CD o CD ROM exteriores, receptores stereo, placas de video, mesas de mezclas o VCR.
  • Page 47: Instalacion

    NOTA: Lea la sección de Notas operativas (pg. 4) de este manual antes de conectar o intentar utilizar el DMS80. 1. Desembale el DMS80. Coloque el DA80 y los altavoces M40 en un lugar seguro y estable. El amplificador DA80 puede soportar hasta 18 kg de peso y se puede colocar bajo un monitor de ordenador si quiere.
  • Page 48 4. Antes de conectar el DA80 a una salida de corriente, asegúrese que el interruptor POWER está apagado (fuera) y que los controles MASTER VOLUME y MIC/INST. LEVEL están girados completa- mente a la izquierda. Conecte el cable “IEC” a la entrada AC INPUT de la parte trasera del DA80 y a una salida de corriente AC con toma de tierra.
  • Page 49: Resolucion De Problemas

    • El DMS80 se calienta mucho y el sonido distorsiona. Cortocircuito de los altavoces. Compruebe de nuevo los cables en las terminales o si hay altavoces adicionales que puede que no lleguen a los 6 ohmnios de impedancia de carga.
  • Page 50: Especificaciones Tecnicas

    E S P E C I F I C A C I O N E S T E C N I C A S DA80: Niveles de señal nominales Entrada línea: Entrada Aux/CD: Entrada Mic/Inst.: Salida línea: Distorsión armónica total: Impedancia de entrada Entrada línea, Aux/CD: 10k Ohms Entrada Mic/Inst.:...
  • Page 51 ® 575 Underhill Blvd., PO Box 9031, Syosset, New York 11791-9031 Phone: 1-800-3SAMSON (1-800-372-6766) Fax: 1-516-364-3888 www.samsontech.com Samson cares about the environment.

Table of Contents