Page 2
Caution: To reduce the hazard of electrical shock, do not remove cover or back. No user serviceable parts inside. Please refer all servic- ing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Hartke and Samson products in the future. Also, be sure to check out our website (www.hartke.com and www.samsontech.com) for complete information about our full product line.
Hartke G10 Guitar Amplifier Features The Hartke G10 amplifier has been designed for modern guitar players looking for a new sound that respects the tone of a classic amp. Here are some of its main features: • Ample power, the G10 combo offers a 10-Watts of shredding power. •...
Guided Tour - Front Panel INPUT - Connect your guitar to this standard 1/4” unbalanced jack. This G Series Input was designed to handle the signals from a guitar with a wide range of output levels from lipstick single coils to the beefiest humbucker. CHANNEL switch - The switch allows you to select either CHANNEL 1 or CHANNEL 2.
Setting Up and Using Your Hartke G10 Guitar Amplifier 1. Remove all packing materials (save them in case of need for future service) and decide where the amplifier is to be physically placed. To avoid potential overheating problems, make sure that the rear panel is unobstructed and that there is good ventilation around the entire unit.
Page 8
Using Your Hartke G10 Guitar Amplifier 8. Next, adjust the BASS and TREBLE equalizer controls to taste. (When you get a great setting that complement your instrument and playing style, it’s a good idea to write it down for future use.) 9.
G10 Sample Settings The G Series combos are powerful amps with a lot of personality. The amplifiers offer guitarist a wide range of sounds and after playing just a short time; you’ll find the tone that's perfectly suited for your playing style and your sound. To get you started, try some of the samples settings below.
Rated Output Power Input Impedance Headphone Output Connector Fuse Rating US & Japan UK & European Weight Dimensions 12.05” (306 mm) H x 10.75” (273 mm) W x 6.5” (165 mm)D Specifications 10 w 1M OHM 200 mW (typical) @ 600 ohms 1/4-inch Phone Jack 8.8 lbs.
Page 12
Hartke 45 Gilpin Avenue Hauppauge, New York 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.hartke.com...