Philips DVD723/001 Service Manual page 30

EN 30 5. DVD 723-743
Error
Code Error name
0008 SP_CONTINU
ITYERROR
0009 DMX_CONTI
NUITYERRO
R
000A LLD_ERROR
000B BCU_ERROR Internal problem in Furore chip
5.6.2 Reprogramming of New Mono Boards.
Caution
This information is confidential and may not be distributed. Only a qualified service person should
reprogram the mono board .
After reset of NV-memory or repair of the mono board, all the customer settings and also the region code
will be lost.
Reprogramming of the mono board will put the player back in the state in which it has left the factory,
i.e. with the default settings and the allowed region code.
Reprogramming is limited to 25 times
When the counter reaches 25, reprogramming is not possible anymore
Reprogramming will be done by way of the remote control.
Put the player in stop mode, no disc loaded.
Press the following keys on the remote control:
< PLAY > followed by numerical keys <1> <5> <9>
The display shows: " - - - - - - - - - - - "
Press now successively the following keys :
for DVD723 /001 /021 /051
for DVD743 /001 /021 /051
Press < PLAY > again.
The TV screen will become BLUE during a short time to confirm that the mono board has been
reprogrammed.
Diagnostic Software, Trouble Shooting and Test Instructions
Explanation
Sequence of sectors coming
from disc is incorrect. Reason:
see SP_SYNCERROR
Sequence of sectors is incorrect.
Reason: problem with buffer
RAM
An illegal audio format was
offered to the decoder. Reason:
unknown audio type on disc or
problem with buffer RAM
: <2><2><2> <0><0><2><0><0>
: <2><2><2> <0><0><3><0><0>
SMA Error Codes
Error
Number Error name
0000 SMA_TIMEO
UTERROR
Figure 5-35
Explanation
Data coming from disc not in
time. Reason: damaged disc or
engine problem.
CL 26532039_028.eps
200302