Table of Contents
Advertisement
System Will Not Dispense Water
• Check on/off switch position
• Check power to dispensing system
• Check location of suction wand in bottle
• Check for empty bottle
• Check for air in system
Discharge Tube Leaks At Fitting
• Push tube all the way into tube stop
• Remove tube and cut 1/4 in. (6.35 mm)
off end, square and reinstall
• Check correct tube size in fitting, tube size
is 1/4 in. (6.35 mm) O.D. Fitting should be
1/4 in. (6.35 mm) I.D.
System Gets warm and turns off
• Check the float switch
• Check for leaks in discharge tube
ITT Flojet warrants this product to be free of defects in material and/or workmanship for a period of one
(1) year after purchase by the customer from ITT Flojet. During this one (1) year warranty period, ITT
Flojet will, at its option and at no charge to the customer, repair or replace this product if found defective
in material or workmanship, with a new or reconditioned product. But not to include costs of removal or
installation.
This is only an overview of our limited warranty. If you would like a copy of our warranty, please call or
write ITT Flojet.
Prior to returning any product to ITT Flojet, call customer service for an authorization number. This
number must be written on the outside of the shipping package. Place a note inside the package with
an explanation regarding the reason for return as well as the authorization number (include your name,
address and phone number).
TROUBLESHOOTING
System Will Not Shut-Off
• Check for leaks in tubing system
• Check for leaks at tube fittings
• Check for leaks at faucet, ice maker or
refrigerator water valve
• Check pressure switch by turning faucet
off and on
• Check float switch position in bottle
System Continually Turns Off and On
While in Use
• Check for restriction devise at appliance inlet.
• Check for filter unit in line.
• Check for internal filters in the refrigerator.
WARRANTY
RETURN PROCEDURE
3
Hide quick links:
Advertisement
Table of Contents
