Replacing a PCI Express card
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 17.
3. Remove the front bezel. See "Replacing the front bezel" on page 18.
4. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 19.
5. Replace a PCI Express card.
Figure 68. Removing a PCI Express card
Note: If the card is held in place by a retaining latch, press the latch
Then, gently remove the card from the slot.
46
M920t User Guide and Hardware Maintenance Manual
1
as shown to disengage the latch.