Advertisement
Name and function of the individual parts
Front Surface
POWER Switch
Turning ON/STANDBY of the product power supply.
• ON: Turn the POWER Switch to be ON after connecting the power cable with the product when you start up
the product.
• STANDBY: Turn the POWER switch to be STANDBY when you cease the operation of the product. The
power of product is automatically turned off after the end processing such as log file saving.
In addition, the problem may be resolved by turning the POWER Switch to be STANDBY and turning the
switch to be ON again when trouble occurred on the product such as no recognition of CONSOLE Port, etc.
PWR Lamp
The lamp indicates the power status of product.
• Turns Off: Power is OFF.
• Turns Green: Under operation.
• Flashes Green: Under start-up just after POWER Switch being ON or under shut down just after POWER
Switch being STANDBY.
ALM Lamp
Indicates the trouble information of product: Red ALM lamp turns on in the following cases;
• Abnormal Self-Diagnosis
The lamp turns ON when failure is detected in the product.
• Fan Stopping
The lamp turns ON when stopping fan which exhausts heat generated by the product.
Stop the use immediately.
• Abnormal Temperature in the Product
The lamp turns ON when product internal temperature is abnormal.
Ensure to install the product properly upon reviewing installation environment in order for internal product
temperature being proper
Fan operation status and internal product temperature are able to be confirmed with [show environment]
command.
CONSOLE Port
This is the RJ-45 port for setting.
Connect to RS-232C terminal (COM Port) of PC with the included RJ-45/DB-9 serial cable.
e microSD Slot and Button
This is the slot to insert microSD/ microSDHC card.
When removing the microSD card, press microSD Button for more than 2 seconds and remove the card after
microSD Lamp being OFF.
Notes
• The microSD slot in this product may not guarantee the performance of all microSD cards.
• The performance check of microSD card is possible with the command, external-memory performance-test go. Refer to the
following URL for the details of microSD card;
http://www.yamaha.com/products/en/network/
• We would recommend the data on microSD to be backed up periodically. Our company does not take any responsibility for the loss
due to data loss and destruction during your usage of this product. Please be forewarned.
f microSD Lamp
This indicates connection/ usage status of microSD card.
• Turns Off: microSD card is not inserted in the slot. Or, microSD card is in the status of removable.
• Turns Green: microSD card is inserted.
• Flashes Green: Accessing to the microSD card.
LAN-1 Port
This is the 10BASE-T,100BASE-TX,1000BASE-T Port.
This is the 4-Port Switching Hub.
h LAN-2 Port
This is the 10BASE-T,100BASE-TX,1000BASE-T Port.
This is the 4-Port Switching Hub.
i LAN-3 Port
This is the 10BASE-T,100BASE-TX,1000BASE-T Port.
LAN-4 Port
This is the 10BASE-T, 100BASE-TX, 1000BASE-T Port.
LINK/DATA Lamp
This indicates the status of LAN Port.
• Turns Off: LAN is under the status of unusable. (Link lost)
• Turns Green: LAN is under the status of usable. (Link established)
• Flashes Green: Data is flowing in the LAN. (Data under transfer)
Speed Lamp; 10/100/1000
This indicates the connection speed of LAN port.
• Turns Off: No connection or connected with 10BASE-T
• Turns Orange: Connected with 100BASE-TX
• Turns Green: Connected with 1000BASE-T
Expansion Slot
Never open the slot.
Rear Surface
Nameplate
Equipment name, serial number, MAC address, etc., of this product are written.
Refer to [Nameplate] for details.
Ventilation Hole
The product internal heat is ventilated with a fan forcibly.
When installing the product, please give consideration not to block the ventilation hole. If not installed properly,
this might be the cause of failure and fire.
Power Inlet
Insert the power cable included. Connect the power plug into the outlet of AC 100-240V (50/60Hz).
Metal Fitting for Preventing Power Cable Disconnection
Insert the included metal fitting for preventing power cable disconnection (U-shaped type) into the metal fitting
hole at main body side before mounting the power cable.
Pull up the metal fitting for preventing power cable disconnection after mounting the power cable. This prevents
the sudden disconnection of the power cable.
Nameplate
Equipment Name
Serial Number
MAC Address
MAC address allocated to each of LAN1, LAN2, LAN3 and LAN4 is written. For example, the following MAC
addresses are set on LAN-1 through LAN-4.
• LAN-1 MAC Address: [00:A0:DE:3A:F0:0C]
• LAN-2 MAC Address: [00:A0:DE:3A:F0:0D]
• LAN-3 MAC Address: [00:A0:DE:3A:F0:0E]
• LAN-4 MAC Address: [00:A0:DE:3A:F0:0F]
Preparation
19-inch Rack installation
The product is compatible with 1U size of 19-inch rack mounting. When mounting the product into 19-inch rack,
use rack mount metal fittings included (2 PCS) and screws included (8 PCS).
The 19-inch rack mounting metal fittings should be equipped as the main body front surface facing the front
direction.
Note
• If the main body of the rack has a door, sufficient care should be taken not to touch any LAN and power cables when mounting the
main body and the necessary wiring.
• When mounting metal fitting on the product, mount 4 screws per metal fitting to fix it securely in place with a Philips-Head screw
driver.
• Never use screws other than countersunk screws for metal fitting mounting included.
Method-A: Mount the rack screw surface of metal fitting for 19-inch rack mounting and the front
surface of the product in the same plane.
Mount the metal fitting for 19-inch rack mounting on the product.
Securely fix by using 4 countersunk screws for metal fitting mounting included.
Method-B: Mount at the 4cm back position than the Method-A.
Mount the metal fitting for 19-inch rack mounting on the product.
Securely fix by using 4 countersunk screws for metal fitting mounting included.
Connections
1
Connect the LAN port of the network equipment to the LAN port of the product using a
LAN cable.
2
Connect the power cable of the product to a
Power Inlet.
Tip
It is recommended that Metal Fitting for Preventing Power Cable
1. Insert the metal
Disconnection included should be mounted in order to prevent
fitting into the
sudden power cable disconnection. Insert the metal fitting into the
hole on the side
of the main body.
hole at main body side before connecting power cable included and
fix by pressing down the metal fitting after power cable connection.
3
Connect the power cable of the product to an outlet.
PWR Lamp turns ON when turn the POWER Switch to be ON.
PWR
4
Turn the power of the network equipment connected to the product ON.
The lamp of the port to which the network equipment is connected being ON or flashing indicates the status is
normal.
/The lamp did not turn ON and is not flashing
Ensure to verify that the LAN cable is properly connected and the power of the connected network equipment is ON.
Major specifications
External Dimensions (width x height x depth (protrusions excluded)):
445mm x 44mm x 400mm
Weight:
4.7kg (accessories excluded)
Power Voltage, Frequency:
AC100-240V (50/60Hz)
Power consumption:
Max. 38 W
Current Consumption:
0.39A, Max
LAN Interface:
Ethernet (RJ-45), 10BASE-T/100BASE-TX/1000BASE-T
Number of Ports: 4 (LAN1/LAN2 port is 4 port switching hub)
Polarity: Straight/ Cross Auto-Distinction or Straight Fixed
Communication Mode: Auto-Negotiation or Fixed Setting
Serial Interface:
RS-232C (DTE Fixed) - RJ-45
Data Transfer Speed: 9,600 bits/sec
microSD Slot:
microSD/ microSDHC (microSDXC is not supported)
File System: FAT or FAT32
Operating environment:
Ambient temperature: 0 ~ 40 ºC
Ambient humidity: 15 ~ 80% (no condensation)
Storage environment:
Ambient temperature: -20 ~ 50 ºC
Ambient humidity: 10 ~ 90% (no condensation)
Indication function (LED):
Front panel: PWR, ALM, LAN (LINK/DATA, SPEED)×10, microSD
Regulatory Compliance:
Safety: IEC 60950-1, EN 60950-1
EMC: EN 55022 Class A, EN 55024
Accessories:
Power Cable (1 pc), LAN cable (1 pc), Serial Cable (1 pc), Power Cable Clamp (1 pc),
Metal Fittings & Screws for Rack Mount (2 Metal Fittings, 10 Screws),
Instruction Manual (this document), CD-ROM (1 pc)
(April 2014, 1st edition)
2. Clamp the
cable in place by
pressing down on
the metal fitting.
Advertisement
