Page 1
READ AND SAVE THESE INSTRUCTIONS WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. Please follow all safety instructions. Hot Beverage Machine...
• Do not use appliance except as indicated in these instructions. • Carafe must never be used on a range top. Use only the designated carafe for your coffeemaker. • Do not use a cracked carafe or a carafe having a loose or weakened handle.
SAVE THESE INSTRUCTIONS THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Extension cords are available from local hardware stores and may be used if care is exercised in their use.
FIGURE 1 FIGURE 2 Features Figure 1 A Water tank lid B On/off switch with LED light C Water tank with cup markings D Steam selector (“OFF” position) E Steam nozzle Feed pipe G Milk pitcher H Drip grid with drip tray Base Carafe base K Thermal Carafe...
Congratulations on the purchase of your new Melitta Hot Beverage machine. You have purchased an innovative and reliable appliance which we hope will give you years of enjoyment. As with every technical appliance, there are some fundamental aspects of this machine which should be observed. Please read the operating instructions carefully and keep them in a safe place.
Unplug and allow to cool for 5 minutes between brewing cycles. IMPORTANT: If coffeemaker is not allowed to cool before immediate repeated use, water placed in water carafe may become overheated. A spray of steam could be released from openings, creating a risk of burns.
Assemble the frothed milk spout as follows (Figure 10): 1. Insert the froth regulator (Figure 2/A) into the suction piece (Figure 2/B) and press it on firmly until froth regulator sits directly on top of suction piece. 2. Push the suction piece into the connector (Figure 2/C) and place the milk discharge outlet (Figure 2/D) onto the connector.
Page 9
10. After making the frothed milk, turn the steam selector to the off position. 11. You can froth as much milk as often as you like provided that there is enough excess water in the water tank. If necessary, simply add more water. Caution: For frothing, do not fill the water tank above the top of the “well”...
Descaling your machine Fill the water tank with water and then add the descaling agent in that order. Swing the swing-out filter back into the appliance. Place the carafe (with lid tightly screwed) onto the base (Figure 1/J). Please note that the lid serves to open the anti-drip valve, and is required to ensure that the water flows through correctly.
Page 11
Press the froth regulator firmly onto the suction piece and check the position of it (horizontal position for maximum amount of froth). Too little or no milk in the pitcher. The flexible hose in the milk carton does not reach far enough into the milk.
Page 12
IMPORTANT NOTICE If any parts are missing or defective, DO NOT return this product. Please call our Customer Service Department for assistance. 800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST Thank You...
LIMITED ONE YEAR WARRANTY Warranty: This Melitta product is warranted by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product.
Page 14
Repair, replacement or refund shall be the sole remedy of the purchaser under this warranty, and in no event shall Salton be liable for any incidental or consequential damages, losses or expenses. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.