Table of Contents What Your Camera Includes ... Computer System Requirements ... A Quick Look at Your Camera ... Preparing Your Camera for Use ... Starting Your Camera ... The Camera Modes ... Installing Spy Shot Photo Manager Software ... Software &...
Introduction Thank you for purchasing your Spy Shot digital camera. Please read this manual carefully and in page order to get the most out of your digital camera. What Your Camera Includes • Digital Camera • Spy Shot Photo Manager software installation CD •...
Preparing Your Camera for Use Battery Installation Your camera requires x .5V AAA battery (preferably alkaline), which must be inserted as follows: . Open the battery compartment by sliding the cover in the direction indicated. . Insert the battery in accordance with the polarity (+/-) shown on the inside of the cover.
Taking Photos . Slide open the viewfinder and move the Photo/Voice selector to Photo position. . Compose your shot using the viewfinder. (The optimal distance between the camera and the subject is approximately 5 feet). 3. Hold the camera steady and press the shutter button to take photos. 4.
Self-Timer The photographer can be included in a photo by using this feature to delay the time between pressing the shutter and taking the photo. . Press the mode button to select the icon shown on the LCD screen. . Press the shutter button to start a 0 second count down (the LCD will flash once a second).
the step by step instructions that will appear on your screen during the installation process. NOTE: To achieve maximum clarity, the optimal distance between the camera and the subject is 5 feet. Software & Camera Driver Installation . Insert the CD into your CD-ROM drive. Ensure that your camera is not connected to the computer.
Page 8
5. Let the “Spy Shot Photo Manager” installer create the folder where the program will be installed, and then click “Install”. 6. Click “Finish” to let the “Spy Shot Photo Manager” installer finish the installation program. 7. This will automatically launch the Install shield for the camera driver. Click “Next”...
9. Congratulations! You have successfully installed the “Spy Shot Photo Manager” software, the “PhoTags WebCam Express” and the Camera driver. Downloading Photos Use the “Spy Shot Photo Manager” program to import photos from your camera. . Plug one end of the USB cable into the USB slot on your camera. .
Capturing (AVI) Video Using Webcam Express Now that you have your camera installed you can use it to capture short movies called AVI files. The length of time you can record an AVI file while the camera is connected to your computer will vary, depending on how much hard drive space you will use to save the file.
877-397-800 or 73-476-5098 to access our technical support information on the phone. For question on warranty information please email: warranty@sakar.com Appendix A: Technical Specification Image Sensor CMOS Sensor 00K (35 x 88) pixels...
Appendix B: Troubleshooting Q: I have taken photos, but my computer says “No photos in camera.” What do I do? • First, ensure that you have taken photos with your camera. Press the shutter button a few times to take some sample photos and try again. If you still get a no photos error, this indicates that the software was not installed correctly or you may not meet the minimum system requirements.
Page 13
Warning . Not suitable for children under the age of 36 months as small part(s) may be generated – choking hazard. . Packaging materials are not toys. Please remove all packaging and packing tags / wires before giving this toy to your child. 3.
Need help?
Do you have a question about the Spy shot digital camera and is the answer not in the manual?
Questions and answers