Thank you for purchasing the 81379 digital camera. Everything you need to take quality Digital Photos is included with your camera. The key Features include • 2.1 Mega pixel Camera with choice of 3 Resolutions- 1600 x 1200 Pixels (UXGA) 1280 x 1024 Pixels (SXGA), 640 x 480 Pixels (VGA) •...
You can use SD card or MMC card. Please push the Card firmly into the slot as far as it will go until you hear “Click” sound. When a memory card is inserted into the digital camera, the digital camera will check the format of the memory card, if the format of Owner’s Manual...
LCD panel of the digital camera will display either “C2” or “C1”. Press the shutter button twice and the digital camera will format the memory card. Once the formatting is finished, the digital camera will enter into normal mode.
Page 5
Please review the license terms and click the “Agree” button to continue. Let the “PhoTags Express” installer create the folder where the program will be installed to, and then click “Install”. Click “Finish” to let the “PhoTags Express” installer finish the installation program. This will automatically launch the Install shield for the camera driver.
Operation Instruction Turn on the power Press the MODE button for about 3 second to turn on the power, and then operate after beep. Take Photo 1. Press the MODE button to power on your camera. 2. Hold the camera steadily and press the shutter button to take the photo. The camera will beep once after the image is saved.
Press Shutter button within 5 seconds. The digits will keep flashing. Press Shutter button within 5 seconds again. All of the photos in the camera are deleted. Delete the Last Photo Repeatedly press MODE button to select the icon Press Shutter button within 5 seconds. The last photo in the camera is deleted. Turn Camera off Press MODE button and hold for 3 seconds to turn off the power.
Regular camera mode 6. Exit settings Esc- exit the Set mode Flash OFF Press MODE button to select the icon SET shown on the LCD display. 2. Press Shutter button within 5 seconds, and then click the Shutter button until you select shown on the LCD display.
High resolution 3. Press MODE button to select ESC. 4. Press the Shutter button within 5 seconds. 1. Low Resolution - 640 x 480 pixels. 2. Standard Resolution- 1280 x 1024 pixels. 3. High Resolution- 1600 x 1200 pixels. Set Standard quality 1.
2. Press Shutter button within 5 seconds, and then click the Shutter button until you select shown on the LCD display. 3. Press MODE button to select ESC. 4. Press the Shutter button within 5 seconds. Camera mode 2. Press MODE button to select the icon SET shown on the LCD display. 2.
6. The “PhoTags Express” application you installed will open in the “Get photos” wizard mode and will ask you to select the photos you want to transfer. Select your photos and click “Next” to continue. 7. Add Active Captions to your pictures. You can add a date, keywords, categories and more. Click “Next”...
Page 12
3. Make sure that your camera is connected and turned ON. Double-click the “PhoTags Express” icon on your desktop to launch the “PhoTags Express” program. Click on the “Get Photos” button on the Main Menu. The “Device Selection” mode will appear. Select your camera device. Your camera or memory card will appear in the “Active devices”...
Add Active Captions to your pictures. With this feature, you can add a date, keywords and categories. Click “Next” to continue. On the next screen, choose where you want to place your photos on your computer. Click on “Finish” to copy the photos to the location you selected. All of the pictures you imported will appear in the “Select photos”...
Using Your Camera As A Web Cam IMPORTANT NOTE: Please set your camera to PC Camera mode web camera /AVI. Make sure the Camera is in PCC mode. Connect the camera to the computer. Open a Web Cam enabled application, such as Instant Messenger or Net Meeting. Position the camera.
877-397-8200 or 732-476-5098 to access our technical support information on the phone. For question on warranty information please email warranty@sakar.com Appendix: Troubleshooting I've taken photos, but my computer says 'No Photos In Camera' - what do I do? First, ensure that you have taken photos with your camera.
Page 16
and your Camera Driver. After removing these programs, restart your computer. If your camera is connected, disconnect it. 2) Now, let's reinstall the software. Insert the CD that came with your camera. It should automatically run the installation3) Now restart your computer again. 4) Once your computer is back up, plug the camera into your computers USB port 5) Right-click on my computer icon and select properties.