Table of Contents
Advertisement
7.2
Checking IP address
(1) Open the front cover on the server section, and set the
MODE/STOP/RUN switch to the "STOP" position.
(2) Hold the RESET/SELECT switch to the "SEL." position.
(3) After the "CF CARD" LED turns off, turn the RESET/SELECT switch
to the "RES." position.
(4) After all the LEDs except the "POWER" LED on the power supply
section turn off, return the RESET/SELECT switch to the central
position.
(5) Wait until the product starts up and the IP address is displayed on
the 7-segment LED at the front.
IP address display (Display example of 192.168.10.1 set in the product)
Hexadecimal: C0
Decimal: 192
Hexadecimal: C0
Decimal: 192
(6) After you finish checking the IP address, turn the MODE/STOP/RUN switch to the "RUN" position.
Hexadecimal: A8
Decimal: 168
Hexadecimal: A8
Decimal: 168
26
Hexadecimal: 0A
Decimal: 10
Hexadecimal: 0A
Decimal: 3
Hexadecimal: 01
Decimal: 1
Hexadecimal: 01
Decimal: 1
Advertisement
Table of Contents
