Download  Print this page

Advertisement

If anchoring to backing between metal studs, studs must be minimum 25 gauge, and
backing must be minimum 22 gauge. Use at least eight (two in each corner) #14 sheet
metal screws with washers, of sufficient length to penetrate at least 3 threads beyond
the backing.
Figure 12: Anchoring the Bracket to Metal Backing
If anchoring to backing between metal studs in an outdoor high wind area, studs must
be minimum 25 gauge, and backing must be minimum 22 gauge. Use at least twelve
(three in each corner) #14 sheet metal screws with washers, of sufficient length to
penetrate at least 3 threads beyond the backing.
Figure 13: Anchoring the Bracket to Metal Backing – High Wind Area
17

Advertisement

Table of Contents

   Also See for Tesla Powerwall 2 AC

   Related Manuals for Tesla Powerwall 2 AC

Comments to this Manuals

Symbols: 0
Latest comments: