•
Remote control in systems with higher-level user interface (e.g. CW 400 with
max. 4 heating circuits or CW 800 with max. 8 heating circuits), can be used
solely as a remote control in conjunction with heat sources with an external
cylinder primary pump
Use
•
Heat source with 2-wire BUS system, EMS 2 or OpenTherm
•
Combination with timers (e.g. MT10, ...) is possible
•
Combination with TR..., TA..., FR... and FW... is not possible.
Scope of delivery
•
User interface
•
Technical documentation
Technical specifications
Dimensions (W × H × D)
Rated voltage
Rated current
BUS interface
Control range
Permitted ambient temperature
Protection class
IP rating
Product data on energy consumption
The following product data complies with the requirements of EU Regulation 811/
2013 as a supplement to Directive 2010/30/EU. The class of temperature controller
is required to calculate the central heating energy efficiency of an integrated system,
and it is therefore incorporated into the system data sheet.
6720830560 (2015/06)
Product Description | 3
82 x 82 x 23 mm
10 ... 24 V DC
4 mA
EMS 2 (2-wire BUS, OpenTherm)
5 ... 30 °C
0 ... 60 °C
III
IP20
CR 10