Technical Specifications - Siemens SINAMICS G120P Hardware Installation Manual

Technical specifications

Permissible converter overload
The converters have different power ratings "High Overload" and "Low Overload" depending
on the expected load.
Figure 6-1
Note
Please note the base load (100 % power or current) for Low Overload is higher than the
base load for High Overload.
The load characteristics shown in the diagram are only examples. We recommend the use of
the "SIZER" engineering software to select the appropriate Power Modules using duty
cycles. See http://support.automation.siemens.com/WW/view/de/10804987/130000
(http://support.automation.siemens.com/WW/view/en/10804987/130000).
PM230 Power Module IP55
Hardware Installation Manual, 11/2014, A5E35319202B AA
Duty cycles, "High Overload" and "Low Overload"
6
73