Cable Preparation - Siemens SINAMICS G120P Hardware Installation Manual

Connecting

4.5 Cable preparation

4.5 Cable preparation
Preparation information
The table and the diagram below are provided to ensure that the cables for use with the PM
power and motor terminals are prepared correctly.
No screening dimensions are given for the input power cables as these are not normally
screened cables.
Diagram Cable type
FSA power cable
FSA motor cable
FSB power cable
FSB motor cable
FSC power cable
FSC motor cable
46
Dimensions
A B
10 mm 60 mm
0.39 inches 2.36 inches
10 mm 60 mm
0.39 inches 2.36 inches
10 mm 60 mm
0.39 inches 2.36 inches
10 mm 50 mm
0.39 inches 1.96 inches
10 mm 50 mm
0.39 inches 1.96 inches
10 mm 50 mm
0.39 inches 1.96 inches
C
-
10 mm
0.39 inches
-
10 mm
0.39 inches
-
10 mm
0.39 inches
Hardware Installation Manual, 11/2014, A5E35319202B AA
D
90 mm
3.54 inches
60 mm
2.36 inches
50 mm
1.96 inches
40 mm
1.57 inches
70 mm
2.75 inches
40 mm
1.57 inches
PM230 Power Module IP55