AMX NMX-ENC-1100 Quick Start Manual page 2

displays an example of a configuration file.
FIG. 3
FIG. 3 Encoder configuration file
Note: Writing the configuration file to the USB drive can only occur once per
drive insertion. If you need the encoder to copy the file another time, you must
remove the USB drive and insert it again into the USB port on the front panel.
Accessing the WebConsole
The encoder features an on-board WebConsole that allows you to configure the
device and make various adjustments to audio/video settings. The WebConsole
is accessed via a standard web browser on a PC that has network access to the
encoder. The NMX-ENC supports Internet Explorer 9 or better, Firefox (21.0+),
and Chrome (27+).
From any PC that has access to the LAN that the target encoder resides on:
Open a web browser and type the IP Address of the encoder in the
1.
Address Bar.
2. Press Enter to access WebConsole for the encoder.
3. Enter the user name and password for the encoder into their respective
text boxes. The default user name is admin and the password is 1988. The
WebConsole page opens (
FIG. 4
FIG. 4 NMX-ENC WebConsole
Additional Documentation
For more information, consult the product page at www.amx.com for data sheets
and the NMX-ENC H.264 Encoder Instruction Manual.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
©2014 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
).
2/14
AMX reserves the right to alter specifications without notice at any time.
93-3201-01 REV: C