Table of Contents
Advertisement
THANK YOU FOR BUYING A RYOBI SCREWDRIVER.
Your new screwdriver has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION:
Carefully read through this entire operator's manual before using your new screwdriver.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your screwdriver properly and only
for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi products.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
2.4 VOLT SCREWDRIVER
Model HP24
SPECIFICATIONS:
Collet
Motor
Switch
No Load Speed
Maximum Torque
Charger Rating
Charger Voltage
Charger Rate
1/4 in. (6.4 mm)
2.4 Volt DC
Single Speed / Reversible
150 RPM
35 lb.- in.
120 Volts, 60 Hz, AC only
2.4 Volt
3-6 Hours
Advertisement
Table of Contents
Related Manuals for Ryobi HP24
Summary of Contents for Ryobi HP24
-
Page 1: Specifications
Charger Rate THANK YOU FOR BUYING A RYOBI SCREWDRIVER. Your new screwdriver has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. -
Page 2: Table Of Contents
Use battery only with charger listed. MODEL CHARGING HP24 7221805 TABLE OF CONTENTS GENERAL SAFETY RULES ■ Use battery operated tool only with specifically des- ignated battery pack. - Page 3 Tool Use and Care ■ Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. ■ Do not force tool. Use the correct tool for your appli- cation.
-
Page 4: Important Safety Instructions For Charger
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER WARNING A damaged battery is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery. ■ Save these instructions. This manual contains important safety and operating instructions for charger part number 7221805. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. -
Page 5: Symbols
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Minutes Alternating Current Direct Current No Load Speed... -
Page 6: Know Your Screwdriver
KNOW YOUR SCREWDRIVER See Figure 1. Before attempting to use your screwdriver, familiarize yourself with all operating features and safety requirements. WARNING: Carefully read through this entire operator's manual before using your new screwdriver. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. If you use your screwdriver properly and only for what it is intended, you will enjoy years of safe, reliable service. -
Page 7: Charging Your Screwdriver
If the charger does not charge your screwdriver under normal circumstances, return both the screwdriver and charger to your nearest Ryobi Authorized Service Center for electrical check. TO CHARGE See Figure 2. -
Page 8: Maintenance
Figure 4. WARNING: When servicing, use only identical Ryobi replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. -
Page 9: Battery Removal
To preserve natural resources, please recycle or dispose of batteries properly. R B R C This product contains nickel-cadmium batteries. Local, state or federal laws may N i C d prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. -
Page 10: Parts Ordering / Service
Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.
Need help?
Do you have a question about the HP24 and is the answer not in the manual?
Questions and answers