Honeywell temaline TK C12 Installation Manual page 25

Inputs
Outputs
TemaKey TK C12 (RTU-K12 code 1500164xx)
2 supervised or digital inputs.
Mode select by JP2
JP2 = Close Supervised inputs
JP2 = Open Digital inputs
• Supervised inputs with 4 status:
normal, alarm, cut, short
• Digital inputs with status: open or Close
Current 0 to 10mA for each input
(internal reference 5Vdc)
Voltage +14V max.
0V min
Number 2
Type Power Open drain (MOSFET)
Current 1,2A continuous
5A (0,5sec) impulsive
Voltage 10V...+14V
supply)
Voltage (absolute max)
external Power supply).
Current 1,2A [5A / 0,5sec peak max –
inductive load]
Normality NO or NC via Jumper setting
JP3 = 1-2 OUT 1 NO
2-3 OUT 1 NC
JP5 = 1-2 OUT 2 NO
2-3 OUT 2 NC
Wire length connection: it depends on cable
diameter, load current sink and load min
power supply
On state resistance = typical 20 mOhm
Load 1A = 0.02 V
(internal Power
10V...+30V (from
Page 25