• The L
• In a free-topology configuration, the sum total of the sections must not
• In a bus configuration, the sum total of the sections must not exceed
• In a free-topology configuration, activate the 50ohm terminator by placing
the appropriate jumper on the FTT10A plug-in of the CTU-PLG06 board
inside the TemaServer.
• In a bus configuration, place two terminators (with resistance values of
100ohm 1% ½W) at the two ends of the bus.
is a trademark of Echelon Corporation
data cable must be twisted-pair.
NET A/B (no polarity)