Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
Chuck Capacity
.......................................1/16 in. to 3/8 in.
Switch
............................. VSR
keyless
chuck
KNOW yOUR DRILL
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
FEATURES
(Variable Speed Reversible)
leVel
sWITch
TRIGGeR
No Load Speed .................................0-1,600 r/min. (RPM)
Input ...................................... 120 V, AC only, 60 Hz, 4.5 A
Net Weight .............................................................. 3.8 lbs.
DIRecTION OF
ROTATION selecTOR
(FORWARD/ReVeRse/
ceNTeR lOck)
lOck-ON
BuTTON
KEyLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LEVELS
Levels are located on the top and end of the motor
housing to help keep the drill bit level during use.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
− English
leVel
Fig. 1
Advertisement
Table of Contents
