Using The Accessories - AEG BPK722910M User Manual

When you use 'Manual' mode, the
appliance uses the recommended
settings. You can change them as
with other functions when using
Assisted cooking Food Sensor or
weight refer to next chapters.
9.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary
to input the food weight, when the
automatic programme starts.
1. You can change the weight at any
time. Press
weight.
2. When the time ends, an acoustic
signal sounds. Press any symbol to
deactivate the signal.
With some programmes turn over
the food after 30 minutes.
10. USING THE
ACCESSORIES
WARNING! Refer to Safety
chapters.
10.1 Food sensor
The food sensor measures temperature
inside the food. When the food is at
the set temperature, the appliance
deactivates.
There are two temperatures to be set:
• The oven temperature (minimum
120°C),
• The food core temperature.
CAUTION! Use only the food
sensor supplied and the original
replacement parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Food sensor cannot be used for liquid
dishes.
• During cooking the food sensor must
or to change the
remain in the dish and the plug in the
socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
The appliance calculates an
approximate end of cooking time.
It depends on the quantity of
food, the set oven function and
temperature.
Food categories: meat, poultry
and fish
1.Activate the appliance.
2. Insert the tip of the food sensor into the
centre of meat or fish, in the thickest part
if possible. Make sure that at least 3/4 of
the food sensor is inside of the dish.
3. Put the plug of the food sensor into the
socket located in the front frame of the
appliance.
The display shows the food sensor
symbol.
4. Press or in less than 5 seconds
to set the food core temperature.
5. Set a heating function and, if
necessary, the oven temperature.
6. To change the food core temperature,
press . When the food core reaches
the set temperature, an acoustic signal
sounds. The appliance deactivates
automatically.
7.Touch any symbol to stop the signal.
English 17