Roast Modes - AEG BPK722910M User Manual

16 www.aegaustralia.com.au | www.aegnewzealand.co.nz
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the appliance
deactivates the heating elements
after 90 % of the set time. The
appliance uses the residual heat
to continue the cooking process until
the time ends (3 - 20 minutes).
8.2 Setting the clock
functions
Before you use the functions:
Duration, End Time, you must set
a heating function and temperature
first. The appliance deactivates
automatically. You can use the
functions: Duration and End Time
at the same time if you want
to automatically activate and
deactivate the appliance on a given
time later. The functions: Duration
and End Time do not work when you
use the core temperature sensor.
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or
time.
4. Press to confirm.When the time
ends, an acoustic signal sounds.
The appliance deactivates.
The display shows a message.
5. Press any symbol to stop the signal.
8.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80°C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes.
It activates after the baking or roasting
procedure ends. You can activate or
deactivate the function in the menu:
Basic Settings.
1. Activate the appliance.
to set the necessary
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows: Heat + Hold.
5. Press to confirm. When the function
ends, an acoustic signal sounds.
The function stays on if you change the
heating functions.
8.4 Time Extension
The function: Time Extension makes the
heating function continue after the end of
Duration.
Applicable to all heating functions
with Duration or Weight Automatic.
Not applicable to heating functions
with the core temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press any
symbol. The display shows the
message.
2. Press to activate or
3. Set the length of the function.
4. Press .

9. ROAST MODES

WARNING! REFER TO SAFETY
CHAPTERS.
9.1 Assisted Cooking for
Roast Meats
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them
1. Activate the appliance.
2. Select menu: Heating
3. Select sub-menu: Roast Meats
Press to confirm.
4. Select the type of meat.
Press to confirm.
5. Select a doneness level,
6. Select a cooking mode (Manual, Food
sensor Automatic, Weight Automatic).
Press to confirm. Select a
doneness level,
to cancel.
to confirm.
to confirm.