Fault Rectification; Malfunction Causes And Remedies - Silvercrest SLE 500 A1 Operating Instructions Manual

NOTE
► The water tank
appliance cannot be switched on.
♦ Switch the on/off switch
The green "ON" LED
Fault rectification
This section contains important information on fault localisation and rectification.
WARNING
Observe the following safety information to avoid risks and property damage:
► Repairs to electrical appliances may only be carried out by specialists trained
by the manufacturer. Improper repairs can pose considerable risk to users
and can cause damage to the appliance.

Malfunction causes and remedies

The following table will help with localising and remedying minor malfunctions:
Defect
The appliance
will not switch
on.
The appliance
produces no
or very little
condensate.
NOTE
► If you cannot solve the problem with any of the aforementioned methods,
please contact the Customer Service department.
│ GB │ CY
■ 8
must be inserted fully into the appliance, otherwise the
7
2
Possible cause
The power adapter
10
plugged in.
The mains power socket is not
supplying power.
Safety stop due to missing or
incorrectly inserted water tank
The water tank 7 is full.
The air intake opening
air outlet opening is soiled or
covered.
Windows and doors in the room
are open.
3 to position "I" to switch the appliance on.
lights up.
Rectification
is not Plug the power adapter
mains power socket.
Check the house fuse.
Ensure the water tank
7 .
correctly.
Empty the water tank
it into the appliance.
Ensure that the air intake and outlet
or the
5
openings (
free of blockages.
Close the windows and doors.
into the
10
is inserted
7
7 and reinsert
5 + ) are clean and
SLE 500 A1