Russound CAS-RC User Manual

Use Page Up/Down with cable or
satellite boxes. Note: May have to
learn in these functions.
CAS-RC
View the current channel and
program information.
LEARNING & PRE-PROGRAMMED
Display the menu for the selected device.
REMOTE CONTROL
Exit the selected device's menu, guide, or
program without making a menu selection.
Display the program guide for the selected
device.
Change inputs on selected device.
To change inputs on CAS44 use
S1 - S4 buttons.
Press LAST once to recall the last channel
and to page back one screen in the main
menu.
Directly enter channels (e.g., 09
or 31). Press OK to send
channel number entries on
some TV models.
INSTALLING BATTERIES
USER GUIDE 1. On the back of the CAS-RC, push the tab and lift
off the battery cover.
INTRODUCTION 2. Obtain two (2) fully-charged AA alkaline bat-
teries. Match the + and – marks on the batter-
The CAS-RC Remote Control is designed for use ies to the + and – marks in the battery case,
with the Russound CAS44 controller amplifier and then insert the new batteries.
system keypads (KP6, KP4, and KPL). It is designed
3. Press the battery cover back into place. The tab
to operate source devices and the audio system key-
should click when the cover is locked.
pad, and is preprogrammed to control Russound
4. Test the unit by pressing Power and any mode
components ST2 Tuner and SMS3 Media Server).
key. If the batteries are inserted correctly, the
The CAS-RC controls up to four devices. For best
LED will blink once.
results, please read and follow all the remaining
PROGRAMMING A DEVICE
instructions and keep this guide for future reference.
FEATURES AND FUNCTIONS
Note: S1, S2, S3, S4,Vol +/-, Mute and Power are sys-
tem commands and are the same for any source.All
Note: S1, S2, S3, S4,Vol +/-, Mute and Power are sys-
other buttons are dependent upon the device code
tem commands and are the same for any source.All
associated with the source.
other buttons are dependent upon the device code
Before proceeding, find the codes for the devices you
associated with the source and may vary from
want to program in, under "Manufacturer's Codes"
device to device.
in this manual. To control Universal TV,VCR or
The following Key Charts provide a general descrip-
DVD, Cable or Satellite Receivers,Amplifier or Tuner,
tion of button functions.
and Auxiliary devices, follow these steps.
Key Charts
1. Turn on the device (e.g., DVD
player) and if needed, load media.
Select a device.
2. Press a device key (S1, S2, S3 or S4).
These keys are preset
for Russound 3. Press and hold SET until the red LED blinks
devices, but can be re-programmed (see twice, then release.
"Programming a Device").
4. Enter the first five-digit code for your
S1= Russound Tuner 1
device.The LED blinks once as each digit is entered.
S2= Russound Tuner 2
If the code is valid, the LED blinks twice.
S3= Russound SMS3 Stream 1
Note: If the LED does not blink twice, repeat steps 2
S4= Russound SMS3 Stream 2
to 4 and try entering the code again.
5. Aim the remote at the device and press a
Turn the selected zone on or off.
function button. The device should in turn perform
the requested function. If it does not, repeat steps
3-5, trying each code for your brand until you find a
Program sequences.
code that works. If you cannot find a code that
works see "Searching for Your Code" in this manual.
6. Repeat steps 1-5 for the other devices you
Select next/previous.
want to control. For future reference, write down
Select the next/previous chapter on some
each working device code.
models of DVD players.
Press LAST to recall the last-viewed channel.
SEARCHING FOR YOUR CODE
Raise or lower the sound level.
Note: S1, S2, S3, S4,Vol +/-, Mute and Power are the
Press MUTE to turn the sound off or on.
same for any source.All other buttons are dependent
upon the device code associated with the source.
If your device does not respond to the remote after
Move the cursor in the menu
trying all codes listed for your brand, or if your
screens.
brand is not listed, try searching for your code:
1. Press a device key once.
2. Press and hold SET until the red LED blinks
Press OK to choose the high-lighted menu twice, then release.
option. Performs "Enter" function for
3. Enter 9-9-1, then the device group number
devices.
(see below). The LED blinks twice.
0 Cable (Cable Converters,
Press Enter to choose the high-lighted
Video Accessories, Satellite
menu option. Performs "OK" function for
Receivers)
devices.
1 TV (TVs)
Skip backward, rewind, fast
2 VCR (VCRs, DVD players)
forward, skip forward, stop
3 Audio (Audio Amplifiers,
pause, or play tracks on disc.
Audio Amp/Tuners,
CD players)
4. Aim the remote at the device and press Deleting all learned keys in a specific mode
POWER. The remote sends IR codes from its library
1. Press and hold SET until the LED blinks twice.
to the selected device, starting with the most popu-
Note: if more than 15 seconds pass between key
lar code first. If the device responds, go to step 6.
presses, the remote exits programming.
5. If the device does not respond, press CH+. the
2. Press 9 7 6.
remote will try the next code. Continue until the
3. Press a device key twice (S1, S2, S3, S4) to
device responds. Press CH- to try the previous code.
delete all the learned keys for that mode. The LED
6. Press SET to lock in code. To search for other
blinks twice.
device codes, repeat steps 1-5.
4. Repeat steps 1-3 for another set of keys for a
CHECKING THE CODES device, or press and hold SET to exit programming
TROUBLESHOOTING
If you have set up the remote using the procedure in
"Searching for Your Code, " you may need to find out
Problem: LED does not blink when you press a key.
which five-digit code is operating your equipment.
Solution: Replace battery with two new AA batteries.
For example, to find out which code is assigned to
Problem: LED blinks when you re-press a key, but device
your TV:
does not respond.
1. Press the S# key to which the TV is assigned.
Solution: Make sure the remote is aimed at your device and is
2. Press and hold SET until the red LED blinks
not more than 15 feet away.
twice, then release.
Problem: LED blinks one long blink.
3. Enter 9 9 0. The LED blinks twice.
Solution: An entry error has occurred (e.g., wrong key). Try
4. To view the code's first digit, press 1. Count the
entry sequence again.
LED blinks (e.g., three blinks =3), and enter the
Problem: Remote does not control devices or commands are
number in the appropriate device list in step 6 of
not working properly.
"Programming a Device. " If a code digit is 0, the
Solutions: Try all listed codes for the device. make sure the
LED does not blink.
device operates with an infrared remote control.
5. Repeat step 4 for the remaining digits, using 2
Problem: Channels do not change properly.
for the second digit, and so on.
Solution: If the original remote control required you to press
6. To check for other device codes, repeat
ENTER to change channels, press enter on this remote after
steps 1-5, using the appropriate S# key.
entering the channel number
USING LEARNING
ADDITIONAL INFORMATION
The CAS-RC includes a Learning feature so you can
The CAS-RC does not have any user-serviceable parts.
add functions that are unique to your home enter-
Opening the case, except for the battery cover, may cause
tainment devices (e.g.,VCR Tracking Up or Down).
permanent damage to the CAS-RC.
The following precautions apply.
Copyright ©2005 Russound, Inc.
• The original remote controls must be in working
Russound, 5 Forbes Road, Newmarket, NH 03857
order for learning to work properly.
603-659-5170 www.russound.com
• Learned keys are mode specific, so each one can
28-1207
store a unique function for each mode.
MANUFACTURER'S CODES
• Do not use the following keys for learning: Device
Keys, SET, BACK, or Record.
Setup Codes for Audio Amplifiers
• Learning capacity is approximately 40 to 100 keys,
Accuphase 30382
depending on the code being learned.
Acurus 30765
• Certain device codes are not learnable including
Adcom 31100, 30577
multi-frequency types, some high frequency ones,
Aiwa 30406
and other unusual formats.
AudioSource 30011
• For optimum learning, avoid high levels of ambient Bel Canto Design 31583
light such as natural sunlight or energy-efficient flu- Bose 30674
Carver 30269
orescent lights.
Classe 31461, 31462
• Have the original remote controls handy before
Curtis Mathes 30300
programming learning.
Denon 30160
Programming a learned key
Durabrand 31561
Note: If more than 15 seconds pass between key
GE 30078
presses, the remote exits programming. Harman/Kardon 30892
JVC 30331
1. Press and hold SET until LED flashes twice.
Kenwood 30356
2. Press 9 7 5.
Korsun 31483
3. Press a device key once (e.g., S1, S2, S3, S4) to
Left Coast 30892
assign a mode for learning.
Lenoxx 31561
Linn 30269
4. Place the CAS-RC head-to-head (about 2"
Logitech 31408
apart) from your original remote control.Also locate
Luxman 30165
the key (on original remote control) that will serve
Magnavox 30269
as the teaching function.
Marantz 30892, 30321, 30269
5. On the CAS-RC, press a key where the learned
Mark Levinson 31483
function will be stored.
Nakamichi 30321
6. On the original remote, press and hold the the
NEC 30264
key to be learned. The CAS-RC LED will turn Optimus 30395, 30300
off.Continue holding the key on the original remote Panasonic 30521, 30308
until the CAS-RC LED blinks twice. Parasound 30246
Philips 30892, 30269
Note: If the LED displays one long blink, a learning
Pioneer 30013, 30300
error has occurred. Try repeating this step again
Polk Audio 30892, 30269
until a successful capture occurs. If the function is
PS Audio 31523
still not captured, press and hold SET to exit pro-
RCA 30300
gramming. Review the learning precautions listed
Realistic 30395
above, or the Troubleshooting tips below, before
Sansui 30321
beginning again at step 1.
Shure 30264
7. To program another key for the same source, Sony 30689, 30220, 30815
repeat steps 5-6. To program another device, repeat Soundesign 30078, 30211
steps 1-6. Press and hold SET to exit programming. Technics 30521, 30308
Victor 30331
Deleting a single learning key
Wards 30078, 30211, 30013
1. Select a source.
Yamaha 30354, 30143, 30133, 30504
2. Press and hold SET until the LED flashed
YBA 31502
twice.
Setup Codes for Audio Amp/Tuners
NOTE: If more than 15 seconds passes between key
ADC 30531
presses, the remote exits programming.
Adcom 31616, 30616, 31617
3. Press 9 7 6.
Aiwa 31405, 30158, 30189, 31243, 31089,
4. Press the key (twice) containing the learned 31388, 30121, 30405, 31321, 31641, 31347
Akai 30224, 30076, 31512, 31255
function to be deleted. The remote blinks twice.
Alco 31390
5. Repeat steps 2-4 for another key on the same
Amphion Media Works 31615, 31563
source, or press and hold SET to exit programming.
AMW 31563, 31615 Samsung
Anam 31609, 31074, 30281 Sansui
Apex Digital 31430, 31257 Sanyo
Arcam 31120 Scott
Audiophase 31387 Sharp
Audiotronic 31189 Sharper Image
Audiovox 31390, 31627
AVLight 30158
Sherwood
Bel Canto Design 31584
Bose 31229, 31253, 30639 Shinco
Shinsonic
Brix 31602
Silsonic
Cambridge Soundworks 31477, 31370
Sonic
Capetronic 30531
Sonic Blue
Carver 31189, 30189, 30042, 31089, 30008, 30360
Sony
Casio 30195
Clarinette 30195
Classic 31352
Coby 31513, 31389, 31263
Compaq 31136
Soundesign
Criterion 31420
Stereophonics
Curtis 31596
Sunfire
Curtis Mathes 30080
Tae Kwang
Daewoo 31250
Teac
Dell 31383
Technics
Denon 31360, 30004, 31104, 30771, 31311,
30273, 31142, 30301
Techwood
Dynamic Bass 30360
Thorens
Emerson 30424, 30255
Venturer
Fisher 31409, 30360, 30219, 31801, 30042
Victor
Fonmix 31360
Wards
Fosgate 31487
Yamaha
Garrard 30424, 30281, 30463, 30146, 30440
Gateway 31517, 31567
Yorx
GE 31379
Zenith
Glory Horse 31263
Setup Codes for Cable Converters
Go Video 31532
GoldStar 30281 ABC
GPX 31299
Allegro
Hafler 30146
Harman/Kardon 30110, 30189, 30891 Americast
Hewlett Packard 31181 Antronix
Hitachi 31801, 31273 Archer
Initial 31426 Belcor
08/03/05
Bell & Howell
Inkel 30027, 30062, 30502, 30491
Bell South
Integra 30135, 31298
JBL 30110, 31306, 30281 Cable Star
JVC 30074, 31282, 31263, 31495, 31374 Cabletenna
Kansai 30440 Cableview
Kenwood 31313, 31570, 31569, 30027, 31051, Century
30077, 30313, 31027, 30042, Citizen
30239, 30569, 31052, 30186, 30314 Clearmaster
KLH 31412, 31390, 31428 ClearMax
Koss 30424, 30255, 31366
Colour Voice
Lasonic 31798, 31510
Comtronics
Lenoxx 31437
Contec
Lexicon 31076 Coolmax
Linn 30189 Daeryung
Liquid Video 31497 Digi
Lloyd's 30195
Director
LXI 30181
Dumont
Magnavox 31189, 31269, 30189, 30128, 30391,
Eastern
30195, 31089, 31514, 30531
Emerson
Marantz 31189, 31269, 30039, 30189, 31089,
Everquest
31289, 30200, 30128
Focus
MCS 30039, 30346
Funai
Memorex 31596
Garrard
Mitsubishi 31393
GC Electronics
Modulaire 30195
Gehua
Musicmagic 31089
Gemini
NAD 30320
General Instrument 00476, 00810, 00276, 00003, 00014,
Nakamichi 30347, 30097, 31555
NEC 30235
Global
Norcent 31389
GMI
Onkyo 30135, 31298, 30842, 30380, 31531
GoldStar
Optimus 31023, 30801, 31074, 30080, 30186,
Goodmind
30531, 30797, 30042, 30181,
Hamlin
30440, 30738, 30849, 30177, 30219, 30670
Hitachi
Oritron 31497, 31366
Hytex
Panasonic 31518, 30039, 31548, 31764, 30518,
Jasco
31350, 31763, 30367, 31316,
Jebsee
31509, 31633, 30309, 31288, 31363
Jerrold
Penney 30195
Philco 31390
Leon
Philips 31189, 31269, 30189, 31365, 31089,
LG
31266, 31283, 30891, 31368,
Linsay
30391, 31120, 31268
Magnavox
Pioneer 31023, 30150, 30630, 31184, 30080,
Memorex
30531, 31084, 31384, 30244,31343
Motorola
Polaroid 31508
Movie Time
Polk Audio 30189, 31289
MS
Proscan 31254
MultiVision
Qisheng 31609, 31390
Novaplex
Quasar 30039
NSC
RadioShack 31263
Oak
RCA 31023, 31609, 31254, 30346, 30531,
Optimus
31154, 31511, 30080, 30530,
Pace
31074, 31390, 30054, 30360
Panasonic
Realistic 30195, 30181, 30163
Panther
Regent 31437
Paragon
Rio 31869, 31383
Philips
Russound Tuner1 31493
Russound Tuner2 31494
Pioneer
Saba 31519
31500, 31295 Popular Mechanics 00400
30189, 30346, 30193, 31089 Pulsar 00000
30801, 30360, 31469, 30219, 31251 Quasar 00000
30163, 30322 RadioShack 00015, 00883, 00797, 00315
31286, 30186, 31386, 31361 RCA 00021
31545, 31556, 30797, 31409, 31416, Realistic 00207
31549, 31385, 31411, 31546,
Recoton 00400
31723, 31263, 31410
Regal 00279, 00273, 00259, 00020
30491, 31423, 30062, 31077, 30502, 31653
Regency 00002
31390 Rembrandt 00011
31426
Runco 00000
30176, 31426
Samsung 00000, 00144, 00040
30281
Scientific Atlanta 01877, 00877, 00477, 00008, 00017
31383, 31869, 31532
Seam 00510
31058, 31441, 31258, 31759, 30158,
Signal 00040, 00015
31442, 31529, 31758, 31371, 31503,
Signature 00011
31042, 31658, 31158, 31858, 31367,
SL Marx 00040
31406, 31458, 30168, 31558, 31131,
Sony 01006
31349, 31382
Sprucer 00021
30670
Starcom 00003, 00014, 00015
31023
Stargate 00015, 00797, 00040
31313, 30314, 30313, 31052
Starquest 00015
30440
Supercable 00276
30163, 31267, 31074, 31528, 30463, 31390
Supermax 00883
31308, 31518, 30039, 30518, 30309,
Sylvania 00001
31309, 30208
Tandy 00258
30281
Teleview 00040
31189
Texscan 00001
31390, 30849
TFC 00310
30074
Timeless 00040
30158, 30189, 30080, 30054
Tocom 00012, 00013
30176, 30081, 31176, 31375, 30186,
31331, 31276 Torx 00003
Toshiba 00000
30195
Trans PX 00276, 00153, 00315
31293, 30857, 30281, 31869
Tristar 00883
TS 00003
00003, 00008, 00014, 00001, 00007,
Tusa 00015
00013, 00011, 00017
TV86 00063
00315, 00153
Unika 00207, 00153, 00022
00899
United Artists 00007
00207, 00022
Universal 00153, 00056, 00207, 00022, 00191
00797, 00207, 00153, 00022
V2 00883
00056
Viewmaster 0 0883
00014
Viewstar 00063, 00027, 00258
00899
Vision 00883
00056
Vortex View 00883
00022
Zenith 00000, 00525, 00899
00022
Zentek 00400
00153
Setup Codes for CD Players (SMS3)
00315, 00153
ADC 30018
00883
Adcom 30155, 30234
00883
Aiwa 30157, 30124, 30012
00025, 00031
Akai 30156
00040
Audio Alchemy 30194
00019
Audio-Technica 30170
00883
BSR 30245, 30194
01877, 00877, 00477, 00008
Burmester 30420
00637
California Audio Labs 30029, 30303
00476
Carrera 30194
00637
Carver 30157, 30437, 30179
00002
Classic 31297
00797
Crown 30122
00040, 00015
DAK 30245
00400
DBX 30254
00019
Denon 30873, 30003
00153
DKK 30000
00207, 00056
DMX Electronics 30157
00476
Dynamic Bass 30179
00797, 00015
Emerson 30305, 30164, 30155, 30469
Fisher 30179, 30174, 31325, 30088, 30342
00011, 00015
Garrard 30245, 30420, 30393, 30280, 30425
01327
GE 30009
00015, 00797
Gemini 30625
00144, 00040
Genexxa 30032, 30305, 30164
00797
GoldStar 30417
00009, 00273, 00034, 00020, 00259
GPX 31296
00014, 00011
Harman/Kardon 30157, 30173, 31202, 30426
00007
Hitachi 30032, 30155
00015, 00315, 00153
Inkel 30196, 30180, 30437
00400
Integra 30101
00476, 00810, 00276, 00003, 00012,
JVC 30072, 31294, 30655
00014, 00011, 00015
Kenwood 30681, 30826, 30626, 30028, 30037,
00015
30036, 30190
00144, 00040
KLH 31318
00440
Kodak 30287
00027
Korsun 31484
00000
Koss 31317
00476, 00810, 00276, 01254, 01106, 01376
Krell 30157
00156, 00063
Kyocera 30018
00015
LG 31208
00012
Linn 30157
00618
Luxman 30093
00063, 00156
LXI 30305
00019, 00007
Magnavox 30157, 30305
00021
Marantz 30626, 30029, 30157, 30180
01877, 00237
Mark Levinson 31484
00000, 00008, 00107, 00040, 00021
McIntosh 30287
00637
MCS 30029, 30043
00000
Miro 30000
00317, 00027, 00025, 00153, 00013,
Mission 30157
00031, 01305
MTC 30420, 30625
01877, 00877, 00144, 00533, 01021
Nakamichi 30147
NEC 30043, 30234
Nikko 30174, 30170, 30164, 30625
NSM 30157
Onkyo 30868, 30101
Optimus 31063, 30000, 30032, 30037, 30342,
30437, 31075, 30145, 30194, 30305,
30426, 30087, 30179, 30280, 30420,
30468, 30175, 30196
Panasonic 30029, 30752, 30303
Parasound 30420, 30194
Philips 30626, 30157, 30287
Pioneer 31063, 31062, 30032, 30305, 30468, 31087
Polk Audio 30157
Proton 30157
QED 30157
Quad 30157
Quasar 30029
RadioShack 31075
RCA 31062, 30032, 30305, 30764, 30179,
30468, 30009, 30155, 30420, 30053
Realistic 30164, 30180, 30155, 30179, 30175, 30420
Rotel 30157, 30420
Russound Strm1 31884
Russound Strm2 31885
Russound Strm3 31886
SAE 30157
Sansui 30157, 30305, 30202
Sanyo 30179, 30087
SAST 30157
Scott 30305, 30164, 30155
Sears 30305
Sharp 30861, 30037, 30180
Sherwood 31067, 30196, 30180, 30426
Shure 30043
Silsonic 30888, 30036
Sonic Frontiers 30157
Sony 30490, 30000, 31364, 30185, 30605,
30100, 30604
Soundesign 30425, 30145
STS 30018
Symphonic 30305
TAG McLaren 30157
Tascam 30420
TDK 31208
Teac 30393, 30180, 30174, 30420
Technics 30029, 30207, 30303
Tivoli Audio 31553
Vector Research 30194, 30417
Victor 30072
Wards 30157, 30053
Yamaha 30888, 30036, 30187, 30170, 31292
YBA 30625
Yorx 30461
Zonda 30157
Setup Codes for DVD Players
Adcom 21094
Advent 21016
Aiwa 20641, 21912
Akai 20899, 20770, 21975, 21089
Allegro 20869
Amphion Media Works 22016, 22001
AMW 20872, 22016, 22001, 21176
Anam 21913
Apex Digital 20672, 20717, 20797, 21020, 21100,
20796, 21004, 21061, 21937, 20794,
20830, 21056, 21915, 20755
Aspire Digital 21168
Audiologic 20736
Audiovox 21071, 21122, 21041, 21121, 21072
Axion 21071, 21072
B & K 20662, 20655
Bel Canto Design 21571
Blaupunkt 20717
Blue Parade 20571
Broksonic 20868, 20695
Cambridge Soundworks 21916
CAVS 21057
Changhong 20627, 21061
CineVision 20876, 20869
Classic 21917
Coby 20778, 21107, 21086, 21923, 20852, 21165
Criterion 22007
Curtis Mathes 21087
CyberHome 21023, 21129, 20816, 21117, 21024
Daewoo 20784, 20869, 20833, 21918, 21172, 20705
Denon 20490, 20634
Dual 21085, 21068
DVD2000 20521
Emerson 20591, 20675, 20821
Enterprise 20591
Fisher 20670, 21919
Funai 20675
Gateway 2 1077, 21073, 21158
GE 20522, 20815, 20717
Go Video 20744, 20869, 21099, 21970, 20715,
0833, 21075, 21730, 20783, 21044, 21144
GPX 20699, 20769
Greenhill 20717
Harman/Kardon 20582, 20702
Hitachi 20573, 20664, 21919
Hiteker 20672