Download Print this page

Russound SIX-SOURCE CONTROLLER CAM6.6 Instruction Manual: Keypad Diagnostics Menu

Six-zone, six-source controller; six-zone, six-source am/fm receiver.
Hide thumbs


The Diagnostics Menu allows the installer to run
a diagnostic check on the keypad and to verify
the firmware version. The Diagnostics Menu also
contains the update firmware procedure for
updating the UNO-S1 and UNO-S2's firmware.
To access the Diagnostics Menu, press and hold
the Setup button on the right side of the keypad
until "DIAGNOSTICS" appears on the display. The
menus are outlined in the diagram below.
UNO Keypad Diagnostics Menu
When finished, press and release the Setup but-
ton again (except for the Update Firmware where
the power must be cycled).
Note: Do not change Controller ID settings in
this menu. Controller ID is set in the Controller
Setup menu (see Controller Setup Menu on
page 72).


   Also See for Russound SIX-SOURCE CONTROLLER CAM6.6

   Related Manuals for Russound SIX-SOURCE CONTROLLER CAM6.6

This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments:
  • ronald Gacek Jun 24, 2018 10:20:
    not sure how to interface a microphone on a source location.