Download Print this page

Russound SIX-SOURCE CONTROLLER CAM6.6 Instruction Manual: Macro Editor

Six-zone, six-source controller; six-zone, six-source am/fm receiver.
Hide thumbs

Advertisement

INSTALLER
INSTALLATION MENU
MACRO EDITOR (MacEd)
This procedure is used to create a sequence of commands that are launched with one key touch or
other event. Up to 132 macros can be created for the system, and each macro can contain up to 10
commands including other macros and delays. See Macro Editor - Flow Chart on page 75
1. MACRO ID –
(MacID)
2. MACRO NAME –
(MacNm)
3. COMMAND NUM –
(Cmd#)
4. COMMAND TYPE –
(CmdTp)
a. Selected: Learned IR
(LrnIR)
i. LEARNED SRC –
(LnSrc)
b. Selected: Unassigned
(Unasg)
c. Selected: Default
(Deflt)
d. Selected: Macro:
(Macro)
i. MACRO -
(Macro)
ii. MACRO ID –
(MacID)
e. Selected: Delay
(Delay)
f. All Other Selections:
62
Number of Macro up to 132 including any previously named
macros.
Name of Macro (optional).
Number of Command up to 10.
Select the type of source command (e.g., CD, TV, etc.).
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 6)
Selected command and subsequent commands are cleared.
Procedure advances to COMMAND NUM (step 3)
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)
A macro can "call" another macro if a sequence of more than 10
commands is needed.
Enter the macro ID number. Menu advances to COMMAND NUM
(step 3)
Enter a 1- to 60-second delay time to postpone delivery of the
next command in the macro. Procedure advances to COMMAND
NUM (step 3)
Procedure advances to DEVICE CODE (step 5)
(continued next page)

Advertisement

   Also See for Russound SIX-SOURCE CONTROLLER CAM6.6

   Related Manuals for Russound SIX-SOURCE CONTROLLER CAM6.6

   Related Content for Russound SIX-SOURCE CONTROLLER CAM6.6

This manual also for:

Cam6.6t

Comments to this Manuals

Symbols: 0
Latest comments:
  • ronald Gacek Jun 24, 2018 10:20:
    not sure how to interface a microphone on a source location.