Russound SIX-SOURCE CONTROLLER CAM6.6 Instruction Manual Page 28

Six-zone, six-source controller; six-zone, six-source am/fm receiver.
Hide thumbs
INSTALLER
COMPONENT GUIDE
UNO Keypad Update Port
Software Update
If a keypad update is released, it will be available
online at www.russound.com through the Document
Center, under RNET Systems. Before starting the
update procedure, download updates to a PC and con-
nect the correct programming cable from the PC to
the OS update port on the front of the keypad.
UNO-S2 Keypad
UNO-TS2 Touchscreen
28
Required Russound Cable for Programming
UNO-S2, UNO-TS2
- use Programming Cable P/N 2500-121036
UNO-S1
- use Advanced Programming Cable P/N 2500-521065
(Do not put RS-232 level signals into the pins)
2
1
OS Update Port
3
OS Update Port
OS UPDATE PORT- Connection for programming
1
cable used to update UNO keypad OS software.
2
SETUP BUTTON - Activates Installer Setup mode
and accesses update menus
3
RESET BUTTON - Resets UNO-TS2 after update
4
OS UPDATE/RUN JUMPER - Pins are jumpered
during OS update, and removed during normal
operation.
4
UNO-S1 Keypad
1

   Also See for Russound SIX-SOURCE CONTROLLER CAM6.6

   Related Manuals for Russound SIX-SOURCE CONTROLLER CAM6.6

This manual also for:

Cam6.6t

Comments to this Manuals

Symbols: 0
Latest comments: