Adjusting The Projector's Elevator; Operation - Hitachi LP-AW4001 User Manual

Adjusting the projector's elevator

The projector has 2 Rear feet for adjusting the horizontal position and inclination.
You can use the projector as it is with attached Spacers of Rear feet. You can make
more precise adjustments by detaching the spacers and turning the Rear feet.
Spacer
WARNING
to let them swallow the spacers. If swallowed, consult a physician immediately
for emergency treatment.
NOTE
The adjustment angle can be adjusted up to plus or minus 1° each
of foot.
You can attach the spacers to set the projector back to the factory default after
adjusting the foot. If you install the projector in a different place in the future, it is
recommended to keep the spacers and reuse them.

Operation

INPUT button
FOCUS - button
FOCUS + button
Displaying and switching the image
Press the INPUT button on the projector or the remote control. Select a desirable
input referring to the displayed input list.
(continued on next page)
12
Rear foot
Rear foot
MYBUTTON
INPUT
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
ON
INPUT button
OFF
PAGE
UP GEOMETRY PICTURE MUTE
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ENTER
OSD MSG RESET
-1~1°
-1~1°