Download Print this page
Russound A-SRC1 User Manual
Russound A-SRC1 User Manual

Russound A-SRC1 User Manual

A-bus learning & pre-programmed remote control

Advertisement

Quick Links

A-BUS "All off" command
ALL
OFF
A-SRC1
A-BUS "sleep" command
SLEEP
A-BUS® LEARNING &
PRE-PROGRAMMED REMOTE CONTROL
Skip backward, rewind,
USER GUIDE
fast forward, skip forward,
stop pause, or play tracks
on disc.
Use Page Up/Down with cable or
satellite boxes. Note: May have to
learn in these functions.
Issues CCTV1 or CCTV2 command.
View the current channel and
program information.
Display the menu for the selected device.
Exit the selected device's menu, guide, or
program without making a menu selection.
ALL
ON
OFF
SLEEP
OFF
ZONE
DISC
Display the program guide for the selected
device.
Change inputs on selected device.
INTRODUCTION
The A-SRC1 Remote Control is designed for use with
Press LAST once to recall the last channel
the Russound A-BUS A-C68 controller and system
and to page back one screen in the main
keypads (A-KP3,A-K5L and A-KSC). It is designed
menu.
to operate source devices and the audio system key-
Third-party command. Note: may have to
pads. The A-SRC1 controls up to seven devices (six
learn in this function.
A-BUS sources and one local source). For best
results, please read and follow all the remaining
Directly enter channels (e.g., 09
instructions and keep this guide for future reference.
or 31). Press OK to send
channel number entries on
FEATURES AND FUNCTIONS
some TV models.
Note: S1 - S6,Vol +/-, Mute and Power are system
commands and are the same for any source.All
INSTALLING BATTERIES
other buttons are dependent upon the device code
associated with the source and may vary from
1. On the back of the A-SRC1, push the tab and lift
device to device.
off the battery cover.
The following Key Charts provide a general descrip-
2. Obtain two (2) fully-charged AA alkaline bat-
tion of button functions.
teries. Match the + and – marks on the batter-
Key Charts
ies to the + and – marks in the battery case,
then insert the new batteries.
Select an A-BUS
3. Press the battery cover back into place. The tab
device. Issues an S#
should click when the cover is locked.
command and
4. Test the unit by pressing Power and any mode
changes the mode of
key. If the batteries are inserted correctly, the
the remote to
control the source.
LED will blink once.
PROGRAMMING A DEVICE
Toggle the selected A-BUS zone power on
or off. Has talkback LED for programming
Note: S1 - S6,Vol +/-, Mute and Power are system
and confirmation.
commands and are the same for any source.All
other buttons are dependent upon the device code
Program sequences.
associated with the source.
Before proceeding, find the codes for the devices you
want to program in, under "Manufacturer's Codes"
Select next/previous.
in this manual. To control Universal TV,VCR or
Select the next/previous chapter on some
DVD, Cable or Satellite Receivers,Amplifier or Tuner,
models of DVD players.
and Auxiliary devices, follow these steps.
Press LAST to recall the last-viewed channel.
1.
Turn on the device (e.g., DVD
Raise or lower the sound level.
player) and if needed, load media.
Press MUTE to turn the sound off or on.
2.
Press a device key (S1 - S6).
3.
Press and hold SETUP until the red LED
blinks twice, then release.
Select local source.
4.
Enter the first five-digit code for your
device.The LED blinks once as each digit is entered.
If the code is valid, the LED blinks twice.
Input (prefix) command for track,
DISC
Note: If the LED does not blink twice, repeat steps 2
channel, etc.
to 4 and try entering the code again.
5.
Aim the remote at the device and press a
function button. The device should in turn perform
Move the cursor in menu screens.
the requested function. If it does not, repeat steps
3-5, trying each code for your brand until you find a
code that works. If you cannot find a code that
works see "Searching for Your Code" in this manual.
Press OK to choose the high-lighted menu
6.
Repeat steps 1-5 for the other devices you
option. Performs "Enter" function for
want to control. For future reference, write down
devices.
each working device code.
Press Enter to choose the high-lighted
SEARCHING FOR YOUR CODE
menu option. Performs "OK" function
(suffix command) for devices.
Note: S1 - S6,Vol +/-, Mute and Power are the same
A-BUS "on" and "off" commands.
for any source.All other buttons are dependent upon
ON
OFF
the device code associated with the source.
If your device does not respond to the remote after
above, or the Troubleshooting tips below, before
trying all codes listed for your brand, or if your
beginning again at step 1.
brand is not listed, try searching for your code:
7.
To program another key for the same source,
1.
Press a device key once.
repeat steps 5-6. To program another device, repeat
steps 1-6. Press and hold SETUP to exit program-
2.
Press and hold SETUP until the red LED
ming.
blinks twice, then release.
Deleting a single learning key
3.
Enter 9-9-1, then the device group number
(see below). The LED blinks twice.
1.
Select a source.
0
Cable (Cable Converters,
2.
Press and hold SETUP until the LED flashed
Video Accessories, Satellite
twice.
Receivers)
NOTE: If more than 15 seconds passes between key
1
TV (TVs)
presses, the remote exits programming.
2
VCR (VCRs, DVD players)
3.
Press 9 7 6.
3
Audio (Audio Amplifiers,
4.
Press the key (twice) containing the learned
Audio Amp/Tuners,
function to be deleted. The remote blinks twice.
CD players)
5.
Repeat steps 2-4 for another key on the same
4.
Aim the remote at the device and press
source, or press and hold SETUP to exit program-
POWER. The remote sends IR codes from its library
ming.
to the selected device, starting with the most popu-
Deleting all learned keys in a specific mode
lar code first. If the device responds, go to step 6.
1.
Press and hold SETUP until the LED blinks
5.
If the device does not respond, press CH+. the
twice.
remote will try the next code. Continue until the
Note: if more than 15 seconds pass between key
device responds. Press CH- to try the previous code.
presses, the remote exits programming.
6.
Press SETUP to lock in code. To search for
2.
Press 9 7 6.
other device codes, repeat steps 1-5.
3.
Press a device key twice (S1 - S6) to delete all
CHECKING THE CODES
the learned keys for that mode. The LED blinks
twice.
If you have set up the remote using the procedure in
4.
Repeat steps 1-3 for another set of keys for a
"Searching for Your Code, " you may need to find out
device, or press and hold SETUP to exit program-
which five-digit code is operating your equipment.
ming
For example, to find out which code is assigned to
your TV:
TROUBLESHOOTING
1.
Press the S# key to which the TV is assigned.
Problem: Remote does not control devices or commands are
2.
Press and hold SETUP until the red LED
not working properly.
blinks twice, then release.
Solution: Try all listed codes for the device. make sure the
3.
Enter 9 9 0. The LED blinks twice.
device operates with an infrared remote control.
4.
To view the code's first digit, press 1. Count the
ADDITIONAL INFORMATION
LED blinks (e.g., three blinks =3), and enter the
number in the appropriate device list in step 6 of
The A-SRC1 does not have any user-serviceable parts.
"Programming a Device. " If a code digit is 0, the
Opening the case, except for the battery cover, may cause
LED does not blink.
permanent damage to the A-SRC1.
5.
Repeat step 4 for the remaining digits, using 2
Russound is not responsible for typographical errors or
for the second digit, and so on.
omissions.A-BUS is a registered trademark of
6.
To check for other device codes, repeat
LeisureTech Electronics Pty Ltd Australia
steps 1-5, using the appropriate S# key.
Copyright ©2007 Russound, Inc.
USING LEARNING
Russound, 5 Forbes Road, Newmarket, NH 03857
603-659-5170
www.russound.com
The A-SRC1 includes a Learning feature so you can
28-1257
add functions that are unique to your home enter-
MANUFACTURER'S CODES
tainment devices (e.g.,VCR Tracking Up or Down).
The following precautions apply.
Setup Codes for Audio Amplifiers
• The original remote controls must be in working
order for learning to work properly.
Accuphase
30382
Acurus
30765
• Learned keys are mode specific, so each one can
Adcom
31100, 30577
store a unique function for each mode.
Aiwa
30406
• Do not use the following keys for learning: Device
AudioSource
30011
Keys, SETUP, BACK, or Record.
Bel Canto Design 31583
• Learning capacity is approximately 40 to 100 keys,
Bose
30674
depending on the code being learned.
Carver
30269
Classe
31461, 31462
• Certain device codes are not learnable including
Curtis Mathes
30300
multi-frequency types, some high frequency ones,
Denon
30160
and other unusual formats.
Durabrand
31561
• For optimum learning, avoid high levels of ambient
GE
30078
light such as natural sunlight or energy-efficient flu-
Harman/Kardon 30892
orescent lights.
JVC
30331
• Have the original remote controls handy before
Kenwood
30356
programming learning.
Korsun
31483
Left Coast
30892
Programming a learned key
Lenoxx
31561
Note: If more than 15 seconds pass between key
Linn
30269
presses, the remote exits programming.
Logitech
31408
1.
Press and hold SETUP until LED flashes twice.
Luxman
30165
Magnavox
30269
2.
Press 9 7 5.
Marantz
30892, 30321, 30269
3.
Press a device key once (e.g., S1 - S6) to assign
Mark Levinson 31483
a mode for learning.
Nakamichi
30321
4.
Place the A-SRC1 head-to-head (about 2"
NEC
30264
apart) from your original remote control.Also locate
Optimus
30395, 30300
the key (on original remote control) that will serve
Panasonic
30521, 30308
as the teaching function.
Parasound
30246
Philips
30892, 30269
5.
On the A-SRC1, press a key where the learned
Pioneer
30013, 30300
function will be stored.
Polk Audio
30892, 30269
6.
On the original remote, press and hold the the
PS Audio
31523
key to be learned. The A-SRC1 LED will turn
RCA
30300
off.Continue holding the key on the original remote
Realistic
30395
until the A-SRC1 LED blinks twice.
Sansui
30321
Note: If the LED displays one long blink, a learning
Shure
30264
Sony
30689, 30220, 30815
error has occurred. Try repeating this step again
Soundesign
30078, 30211
until a successful capture occurs. If the function is
Technics
30521, 30308
still not captured, press and hold SETUP to exit pro-
Victor
30331
gramming. Review the learning precautions listed
Wards
30078, 30211, 30013
Qisheng
Yamaha
30354, 30143, 30133, 30504
Quasar
YBA
31502
RadioShack
RCA
Setup Codes for Audio Amp/Tuners
ADC
30531
Realistic
Adcom
31616, 30616, 31617
Regent
Aiwa
31405, 30158, 30189, 31243, 31089,
31388, 30121, 30405, 31321, 31641, 31347
Rio
Akai
30224, 30076, 31512, 31255
Saba
Samsung
Alco
31390
Amphion Media Works 31615, 31563
Sansui
AMW
31563, 31615
Sanyo
Anam
31609, 31074, 30281
Scott
Apex Digital
31430, 31257
Sharp
Arcam
31120
Sharper Image
Audiophase
31387
Audiotronic
31189
Sherwood
Audiovox
31390, 31627
Shinco
AVLight
30158
Shinsonic
Bel Canto Design 31584
Silsonic
Bose
31229, 31253, 30639
Sonic
Brix
31602
Sonic Blue
Cambridge Soundworks 31477, 31370
Sony
Capetronic
30531
Carver
31189, 30189, 30042, 31089, 30008, 30360
Casio
30195
Clarinette
30195
Classic
31352
Soundesign
Coby
31513, 31389, 31263
Stereophonics
Compaq
31136
Sunfire
Criterion
31420
Tae Kwang
Curtis
31596
Teac
Curtis Mathes
30080
Technics
Daewoo
31250
Dell
31383
Techwood
Denon
31360, 30004, 31104, 30771, 31311,
Thorens
30273, 31142, 30301
Venturer
Dynamic Bass
30360
Victor
Emerson
30424, 30255
Wards
Fisher
31409, 30360, 30219, 31801, 30042
Yamaha
Fonmix
31360
Fosgate
31487
Yorx
Garrard
30424, 30281, 30463, 30146, 30440
Zenith
Gateway
31517, 31567
Setup Codes for Cable Converters
GE
31379
ABC
Glory Horse
31263
Go Video
31532
Allegro
GoldStar
30281
Americast
GPX
31299
Antronix
Hafler
30146
Archer
Harman/Kardon 30110, 30189, 30891
Belcor
Hewlett Packard 31181
Bell & Howell
Hitachi
31801, 31273
Bell South
Initial
31426
03/27/07
Cable Star
Inkel
30027, 30062, 30502, 30491
Cabletenna
Integra
30135, 31298
Cableview
JBL
30110, 31306, 30281
Century
JVC
30074, 31282, 31263, 31495, 31374
Citizen
Kansai
30440
Clearmaster
Kenwood
31313, 31570, 31569, 30027, 31051,
30077, 30313, 31027, 30042, 30239,
ClearMax
30569, 31052, 30186, 30314
Colour Voice
KLH
31412, 31390, 31428
Comtronics
Koss
30424, 30255, 31366
Contec
Lasonic
31798, 31510
Coolmax
Lenoxx
31437
Daeryung
Lexicon
31076
Digi
Linn
30189
Director
Liquid Video
31497
Dumont
Lloyd's
30195
Eastern
LXI
30181
Emerson
Magnavox
31189, 31269, 30189, 30128, 30391,
Everquest
30195, 31089, 31514, 30531
Focus
Marantz
31189, 31269, 30039, 30189, 31089,
Funai
31289, 30200, 30128
Garrard
MCS
30039, 30346
GC Electronics
Memorex
31596
Gehua
Mitsubishi
31393
Gemini
Modulaire
30195
General Instrument 00476, 00810, 00276, 00003, 00014,
Musicmagic
31089
NAD
30320
Global
Nakamichi
30347, 30097, 31555
GMI
NEC
30235
GoldStar
Norcent
31389
Goodmind
Onkyo
30135, 31298, 30842, 30380, 31531
Hamlin
Optimus
31023, 30801, 31074, 30080, 30186,
Hitachi
30531, 30797, 30042, 30181, 30440,
Hytex
30738, 30849, 30177, 30219, 30670
Jasco
Oritron
31497, 31366
Jebsee
Panasonic
31518, 30039, 31548, 31764, 30518,
Jerrold
31350, 31763, 30367, 31316, 31509,
31633, 30309, 31288, 31363
Leon
Penney
30195
LG
Philco
31390
Linsay
Philips
31189, 31269, 30189, 31365, 31089,
Magnavox
31266, 31283, 30891, 31368, 30391,
Memorex
31120, 31268
Motorola
Pioneer
31023, 30150, 30630, 31184, 30080,
30531, 31084, 31384, 30244,31343
Movie Time
Polaroid
31508
MS
Polk Audio
30189, 31289
MultiVision
Proscan
31254
Novaplex
31609, 31390
NSC
00063, 00156
30039
Oak
00019, 00007
31263
Optimus
00021
31023, 31609, 31254, 30346, 30531,
Pace
01877, 00237
31154, 31511, 30080, 30530, 31074,
Panasonic
00000, 00008, 00107, 00040, 00021
31390, 30054, 30360
Panther
00637
30195, 30181, 30163
Paragon
00000
31437
Philips
00317, 00027, 00025, 00153, 00013,
31869, 31383
00031, 01305
31519
Pioneer
01877, 00877, 00144, 00533, 01021
31500, 31295
Popular Mechanics 00400
30189, 30346, 30193, 31089
Pulsar
00000
30801, 30360, 31469, 30219, 31251
Quasar
00000
30163, 30322
RadioShack
00015, 00883, 00797, 00315
31286, 30186, 31386, 31361
RCA
00021
31545, 31556, 30797, 31409, 31416,
Realistic
00207
31549, 31385, 31411, 31546, 31723,
Recoton
00400
31263, 31410
Regal
00279, 00273, 00259, 00020
30491, 31423, 30062, 31077, 30502, 31653
Regency
00002
31390
Rembrandt
00011
31426
Runco
00000
30176, 31426
Samsung
00000, 00144, 00040
30281
Scientific Atlanta 01877, 00877, 00477, 00008, 00017
31383, 31869, 31532
Seam
00510
31058, 31441, 31258, 31759, 30158,
Signal
00040, 00015
31442, 31529, 31758, 31371, 31503,
Signature
00011
31042, 31658, 31158, 31858, 31367,
SL Marx
00040
31406, 31458, 30168, 31558, 31131,
Sony
01006
31349, 31382
30670
Sprucer
00021
31023
Starcom
00003, 00014, 00015
31313, 30314, 30313, 31052
Stargate
00015, 00797, 00040
30440
Starquest
00015
Supercable
00276
30163, 31267, 31074, 31528, 30463, 31390
Supermax
00883
31308, 31518, 30039, 30518, 30309,
31309, 30208
Sylvania
00001
30281
Tandy
00258
31189
Teleview
00040
31390, 30849
Texscan
00001
30074
TFC
00310
30158, 30189, 30080, 30054
Timeless
00040
30176, 30081, 31176, 31375, 30186,
Tocom
00012, 00013
31331, 31276
Torx
00003
30195
Toshiba
00000
31293, 30857, 30281, 31869
Trans PX
00276, 00153, 00315
Tristar
00883
TS
00003
00003, 00008, 00014, 00001, 00007,
Tusa
00015
00013, 00011, 00017
TV86
00063
00315, 00153
Unika
00207, 00153, 00022
00899
United Artists
00007
00207, 00022
Universal
00153, 00056, 00207, 00022, 00191
00797, 00207, 00153, 00022
V2
00883
00056
Viewmaster
00883
00014
Viewstar
00063, 00027, 00258
00899
Vision
00883
00056
Vortex View
00883
00022
Zenith
00000, 00525, 00899
00022
Zentek
00400
00153
Setup Codes for CD Players
00315, 00153
ADC
30018
00883
Adcom
30155, 30234
00883
Aiwa
30157, 30124, 30012
00025, 00031
Akai
30156
00040
Audio Alchemy 30194
00019
Audio-Technica 30170
00883
BSR
30245, 30194
01877, 00877, 00477, 00008
Burmester
30420
00637
California Audio Labs 30029, 30303
00476
Carrera
30194
00637
Carver
30157, 30437, 30179
00002
Classic
31297
00797
Crown
30122
00040, 00015
DAK
30245
00400
DBX
30254
00019
Denon
30873, 30003
00153
DKK
30000
00207, 00056
DMX Electronics 30157
00476
Dynamic Bass
30179
00797, 00015
Emerson
30305, 30164, 30155, 30469
00011, 00015
Fisher
30179, 30174, 31325, 30088, 30342
Garrard
30245, 30420, 30393, 30280, 30425
01327
00015, 00797
GE
30009
00144, 00040
Gemini
30625
00797
Genexxa
30032, 30305, 30164
00009, 00273, 00034, 00020, 00259
GoldStar
30417
00014, 00011
GPX
31296
Harman/Kardon 30157, 30173, 31202, 30426
00007
00015, 00315, 00153
Hitachi
30032, 30155
00400
Inkel
30196, 30180, 30437
00476, 00810, 00276, 00003, 00012,
Integra
30101
00014, 00011, 00015
JVC
30072, 31294, 30655
00015
Kenwood
30681, 30826, 30626, 30028, 30037,
00144, 00040
30036, 30190
KLH
31318
00440
00027
Kodak
30287
00000
Korsun
31484
00476, 00810, 00276, 01254, 01106, 01376
Koss
31317
00156, 00063
Krell
30157
Kyocera
30018
00015
00012
LG
31208
00618
Linn
30157
Luxman
30093
LXI
30305
Magnavox
30157, 30305
Marantz
30626, 30029, 30157, 30180
Mark Levinson 31484
McIntosh
30287
MCS
30029, 30043
Miro
30000
Mission
30157
MTC
30420, 30625
Nakamichi
30147
NEC
30043, 30234
Nikko
30174, 30170, 30164, 30625
NSM
30157
Onkyo
30868, 30101
Optimus
31063, 30000, 30032, 30037, 30342,
30437, 31075, 30145, 30194, 30305,
30426, 30087, 30179, 30280, 30420,
30468, 30175, 30196
Panasonic
30029, 30752, 30303
Parasound
30420, 30194
Philips
30626, 30157, 30287
Pioneer
31063, 31062, 30032, 30305, 30468, 31087
Polk Audio
30157
Proton
30157
QED
30157
Quad
30157
Quasar
30029
RadioShack
31075
RCA
31062, 30032, 30305, 30764, 30179,
30468, 30009, 30155, 30420, 30053
Realistic
30164, 30180, 30155, 30179, 30175, 30420
Rotel
30157, 30420
SAE
30157
Sansui
30157, 30305, 30202
Sanyo
30179, 30087
SAST
30157
Scott
30305, 30164, 30155
Sears
30305
Sharp
30861, 30037, 30180
Sherwood
31067, 30196, 30180, 30426
Shure
30043
Silsonic
30888, 30036
Sonic Frontiers 30157
Sony
30490, 30000, 31364, 30185, 30605,
30100, 30604
Soundesign
30425, 30145
STS
30018
Symphonic
30305
TAG McLaren
30157
Tascam
30420
TDK
31208
Teac
30393, 30180, 30174, 30420
Technics
30029, 30207, 30303
Tivoli Audio
31553
Vector Research 30194, 30417
Victor
30072
Wards
30157, 30053
Yamaha
30888, 30036, 30187, 30170, 31292
YBA
30625
Yorx
30461
Zonda
30157
Setup Codes for DVD Players
Adcom
21094
Advent
21016
Aiwa
20641, 21912
Akai
20899, 20770, 21975, 21089
Allegro
20869
Amphion Media Works 22016, 22001
AMW
20872, 22016, 22001, 21176
Anam
21913
Apex Digital
20672, 20717, 20797, 21020, 21100,
20796, 21004, 21061, 21937, 20794,
20830, 21056, 21915, 20755
Aspire Digital
21168
Audiologic
20736
Audiovox
21071, 21122, 21041, 21121, 21072
Axion
21071, 21072
B & K
20662, 20655
Bel Canto Design 21571
Blaupunkt
20717
Blue Parade
20571
Broksonic
20868, 20695
Cambridge Soundworks 21916
CAVS
21057
Changhong
20627, 21061
CineVision
20876, 20869
Classic
21917
Coby
20778, 21107, 21086, 21923, 20852, 21165
Criterion
22007
Curtis Mathes
21087
CyberHome
21023, 21129, 20816, 21117, 21024
Daewoo
20784, 20869, 20833, 21918, 21172, 20705
Denon
20490, 20634
Dual
21085, 21068
DVD2000
20521
Emerson
20591, 20675, 20821
Enterprise
20591
Fisher
20670, 21919
Funai
20675
Gateway
21077, 21073, 21158
GE
20522, 20815, 20717

Advertisement

loading

Summary of Contents for Russound A-SRC1

  • Page 1 To check for other device codes, repeat 1. On the back of the A-SRC1, push the tab and lift device to device. steps 1-5, using the appropriate S# key.
  • Page 2: Setup Codes For Vcrs

    Go Video 20744, 20869, 21099, 21970, 20715, Chaparral 00216 Changfeng 20833, 21075, 21730, 20783, 21044, 21144 Crossdigital 01109 Changhai 20699, 20769 DirecTV 00392, 00566, 00639, 01639, 01142, 00247, Changhong Greenhill 20717 00749, 01749, 00724, 00819, 01856, 01076, 01109, 00099, 01444, 01108, 01392, Harman/Kardon 20582, 20702 Chengdu 01443, 01640, 01442, 01414...