Door Panel Assembly - Absco 15081SK Assembly Instructions Manual

6. DOOR PANEL ASSEMBLY

91A
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4MM DRILL BIT
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for
proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws
ABSCO INDUSTRIES
Absco Space Saver Shed
Model: 15081SK
91A
B
ASSEMBLY INSTRUCTION - MODEL: 15081SK 23/10/17
B
INSTRUCTIONS
AND VIDEOS
PAGE 13