Siemens SIMATIC ET 200SP Manual page 16

Cpu 1512sp-1 pn 6es7512-1dk01-0ab0
Hide thumbs Also See for SIMATIC ET 200SP:
Table of Contents

Advertisement

Product overview
2.3 Properties
Properties
The CPU 1512SP-1 PN has the following technical properties:
1. Communication:
– Interfaces
– OPC UA
16
The CPU 1512SP-1 PN has a PROFINET interface (X1 P3) with an integrated 3-port
switch. Port 1 and port 2 are located on the optionally pluggable BusAdapter. Port 3 is
integrated in the housing of the CPU. You connect the PROFINET IO to the CPU via
the BusAdapter. You will find information on the BusAdapters supported by the CPU in
section Wiring (Page 22).
In addition to PROFINET basic functionality, the interface also supports PROFINET IO
RT (real-time) and IRT (isochronous real-time). PROFINET IO communication or real-
time settings can be configured. The basic functionality of PROFINET supports HMI
communication, communication with the configuration system, communication with a
higher-level network (backbone, router, Internet) and communication with another
machine or automation cell.
Port 1 and port 2 can also be used as ring ports for the configuration of redundant ring
structures in Ethernet.
Note
The CPU is delivered without a BusAdapter. You can find the article numbers of the
supported BusAdapters in the "Accessories/spare parts" section of the ET 200SP
distributed automation system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
The CM DP is optionally available with a PROFIBUS interface (X2). You can find
additional information about this expansion module in the manual Communication
module CM DP (http://support.automation.siemens.com/WW/view/en/90156526).
You can find information about connecting the PROFINET IO BusAdapter to the CPU
as well as connecting the optional PROFIBUS interface to the interface module in the
system manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293).
With OPC UA, data is exchanged via an open and vendor-neutral communication
protocol. The CPU, as OPC UA server, can communicate with OPC UA clients such
as HMI panels, SCADA systems, etc.
CPU 1512SP-1 PN (6ES7512-1DK01-0AB0)
Manual, 09/2016, A5E33591411-AC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents