Siemens SIMATIC ET 200SP Manual page 13

New functions Applications
ET 200SP
Support for ET 200AL You can set up a simple connection of IP
in a central configura- 65/67 I/O to the CPU.
tion
You can connect up to 16 ET 200AL I/O mod-
ules via a BA send module on the central bus
of the ET 200SP CPU. The distance between
two ET 200AL modules can be up to 15 m.
You can realize the use of ET 200AL in as-
sembly and handling engineering directly at
moving parts, for example in linear axes or
drag chains.
Increasing the ad- For example, you can use up to 49 ET 200SP
dress space in the energy meter modules behind an ET 200SP
station CPU.
BusAdapter with You can achieve long distances (up to 3 km) between the PROFINET devices.
glass-fiber interface
Support for communications processors
CP 1542SP-1 Flexible expansion of the ET 200SP system with an additional Ethernet interface; network separa-
tion.
CP 1542SP-1 IRC Seamless data recording with time stamping, support for standardized telecontrol protocols DNP3
and IEC.
CP 1543SP-1 ISEC With the integrated security functions firewall (Stateful Inspection) and VPN protocol (IPSec), the
communications processor protects ET200SP stations and subordinate networks against unau-
thorized access, and employs encryption to protect data transmission against manipulation and
espionage.
CPU 1512SP-1 PN (6ES7512-1DK01-0AB0)
Manual, 09/2016, A5E33591411-AC
2.1 New functions in firmware version V2.0
Customer benefits
You do not have to individually run sensors or
actuators at the central control cabinet to the
different sections of a machine or assembly line.
You save time and costs:
Through lightweight construction
•
Reduction of wear and exposure to vibration
•
Increased productivity
•
A larger address space of 2560 bytes (2048
bytes for ET 200SP module + 512 bytes for ET
200AL modules) is available in the station.
The address space has been increased to 288
bytes per module.
Product overview
13