Runco LIGHTSTYLE LS-10D Installation & Operation Manual page 77

Table 4-3 lists the Color Gamut settings and associated x- and y-coordinates for each
primary and secondary color component.
Table 4-3. x/y Color Gamut Values
Primary
REC709
Color
x
Red 0.640
Yellow 0.419
Green 0.300
Cyan 0.225
Blue 0.150
Magenta 0.321
• PCE: To use the Personal Color Equalizer to define a custom color gamut, choose the
"PCE" Color Gamut setting (refer to Color Gamut on page 60). Then, choose PCE
from the Display Color menu and press ENTER.
The DHD Controller uses the PCE settings for all display modes on
Note
a given input.
• Hue/Saturation/Level: PCE provides the ability to define a custom color gamut in
terms of primary (red, green and blue) and secondary (yellow, cyan and magenta)
color hues, saturation and level (brightness).
Each control operates only on the color specified. Surrounding colors are linearly
interpolated based on their distance from each of these colors. In the CIE 1931 Yxy
coordinate system (see Figure 4-8), Hue rotates the color coordinates around the
white point, Saturation adjusts the coordinate's distance from white and Level
adjusts the luminance (Y) of the color relative to white.
Runco LS-10d Installation/Operation Manual
Color Gamut Settings and Associated x/y Values
SMPTE "C"
y x
0.330 0.635
0.505 0.421
0.600 0.305
0.329 0.228
0.060 0.155
0.154 0.318
EBU
y x
0.340 0.640
0.506 0.418
0.595 0.290
0.326 0.220
0.070 0.150
0.162 0.328
61
y
0.330
0.502
0.600
0.329
0.060
0.158
Operation