Status Indicators - Socket SocketScan S700 User Manual

STATUS INDICATORS (CONTINUED)
Vibrate
Vibrate
Command Barcodes are available on pages
beep, and vibrate settings.
If you are using a scanner-enabled application, typically the
application provides settings for LED, beep, and vibrate settings.
Configuration Settings
Time after powering on Scanner
0-5 minutes
5 minutes
2 hours
Meaning
Data successfully scanned.
41-46
Bluetooth mode
Discoverable and connectable
If connection is not made, scanner
powers off
If your scanner is connected but
not used it will power off in 2
hours. When scan button is pressed
the timer is reset.
to modify the LED,
26