Antenna (Aerial) Connection; Portable Function; Headphone Jack; Using Microphone - LG MBD102 Owner's Manual

Antenna (Aerial) Connection

Connect the supplied FM/AM antennas for listening to
the radio.
FM wire
antenna
(supplied)
AM(MW) loop
antenna
(aerial) (supplied)
Note:
• To prevent noise pickup, keep the AM loop antenna
away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.

PORTABLE Function

When you connect a portable music playing device to
the PORABLE IN jack on this device by using a 3.5mm
mini stereo cable (not supplied), you can hear the sound
being outputted from the portable device through the
speaker.
Portable Device
1. Connect the PORTABLE IN jack on this device to a
headphone jack or line out on another portable one
by using a cable.
2. Press AUX repeatedly to select PORTABLE function.
3. Start playing the connected portable device.
4. Adjust the volume by using VOLUME.
Note:
The " 3.5mm mini stereo" is sold separately.
8

Headphone Jack

Connect a stereo headphone plug ( 3.5mm) into the
headphone jack.
Connecting headphones will switch off the speakers

Using Microphone

You can sing with a music source by connecting a
microphone to the unit.
1. Connect your microphone to the MIC1/ MIC 2
2. Play a music you want.
For AM(MW)
reception,connect
3. Sing along with the accompaniment.
the loop antenna
(aerial) to the
terminal marked AM
Note:
• When not using the microphone, set the MIC VOL. to
• If the microphone is set too near the speaker, a
• If sound through the microphone is extremely loud, it

To Adjust ECHO Volume

You can give an echo effect to the sound from the
microphones.
Press ECHO VOL. (
increase the echo volume or decrease it.
(MIN,1 - 14, MAX steps)
PORTABLE IN
Head phone or Line out
Jacks.
"MIC IN" and " " will be shown in the display
window.
Adjust the microphone volume by pressing MIC
VOL. button (or turning MIC VOLUME KNOB).
(MIN,1 - 14, MAX steps)
minimum or turn off the MICs and remove the
microphone from the MIC Jacks.
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using MIC VOL..
may be distorted. In this case, decrease MIC volume.
/ ) on the remote control to